Differences

This shows you the differences between two versions of the page.

--- en:c1_lcdshield [2016/11/14 10:26]
john1117 [Run Console]
+++ en:c1_lcdshield [2016/11/14 11:04] (current)
john1117 [Run Xwindow]
@@ Line 73: / Line 73: @@
 The command chvt N makes /dev/ttyN the foreground terminal.
   sudo chvt 1
+chvt 1 : console\\
-=== 3. Auto login on console ===
+chvt 7 : X11
-Edit tty1 service
+===== Run Xwindow =====
-  sudo systemctl edit getty@tty1
-And add
-  [Service]
-  ExecStart=
-  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
-  odroid@odroid:~$ sudo systemctl cat getty@tty1 | grep Exec
-  ExecStart=-/sbin/agetty --noclear %I $TERM
-  ExecStart=
-  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
-Restart tty1 service
-  sudo systemctl restart getty@tty1
-==== Run Xwindow ====
 === 0. Create a new config file ===
-Add following lines in "/etc/X11/xorg.conf" file.
+  sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
+  sudo vi /etc/X11/xorg.conf
+=== 1. And then, add following lines in "/etc/X11/xorg.conf" file. ===
 <code>
 Section "Device"
-    Identifier    "C1 fbdev"
+    Identifier    "C fbdev"
     Driver        "fbdev"
     Option        "fbdev" "/dev/fb2"
@@ Line 101: / Line 88: @@
 </code>
-=== 1. Run ===
+=== 2. Run ===
-  sudo /etc/init.d/lightdm start
+  sudo /etc/init.d/lightdm restart
+  sudo chvt 7
-===== Console =====
+===== Touch Calibration =====
-  * [[C1_TFT_AUTOCONSOLE | Auto start console mode]]
-===== X Windows =====
-  * [[C1_TFT_AUTOX | Auto start the X]]
   * [[C1_TFT_TOUCH | How to enable & calibrate your touchscreen]]
+===== Auto Run =====
+  * [[C1_TFT_AUTOCONSOLE | Automatically start console mode]]
+  * [[C1_TFT_AUTOX | Automatically start desktop GUI mode]]