Differences

This shows you the differences between two versions of the page.

--- ko:odroidsmartpower [2013/09/13 16:13]
john1117 [IDE]
+++ ko:odroidsmartpower [2013/12/12 13:20] (current)
codewalker
@@ Line 48: / Line 48: @@
 You can download it from http://forum.odroid.com/viewforum.php?f=72
-{{http://www.hardkernel.com/renewal_2011/_Files/prdt/2013/201307/201307231634494316.jpg}}
+The binary source code of ODROID Smart Power. http://dn.odroid.com/Smart_Power/smart_power_app.zip
+{{http://dn.odroid.com/Smart_Power/smartpower.png}}
 ====== Hardware ======
@@ Line 59: / Line 60: @@
 ====== Software ======
 ----
-===== Cross Compiler =====
+===== How to write bootloader =====
+===== How to write firmware =====
+=== Cross Compiler 설치 ===
 MPLAB C18 v3.43 or higher (From Microchip homepage :
 http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010014&redirects=c18)
 In my case, Standard-Eval Version (Free of Charge) was downloaded for my code optimization. It is the trial version and can only be used for 60 days.
-===== IDE =====
+=== IDE 설치 ===
 USB framework, main Smart Power firmware 소스 컴파일을 위한 통합개발환경 다운로드\\
 X IDE v1.51 or higher (From Microchip homepage : http://www.microchip.com/pagehandler/en-us/family/mplabx )
+=== firmware source code downloads ===
-===== How to write firmware =====
 다음 경로에서 Smart Power firmware 소스코드를 받을 수 있습니다. http://dn.odroid.com/Smart_Power/smart_power_fw.zip
@@ Line 78: / Line 82: @@
   * USB/Device - Bootloaders/HID 폴더의 HIDBootloader (windows)를 실행합니다.
   * Smart Power의 ON/OFF버튼을 누른채 Smart Power와 PC를 micro usb cable로 연결합니다.
-  * ON/OFF 버튼과 START/STOP버튼 사이의 LED중 위에 LED가 점멸하는것을 확인합니다.
+  * ON/OFF 버튼과 START/STOP버튼 사이의 LED중 위에 LED가 점멸 하는것을 확인합니다.
   * HIDBootloader에서 import firmware image 버튼을 눌러 hex파일을 선택합니다.
   * Erase/Program/Verify Device 버튼을 누릅니다.
   * 마지막으로 Reset Device 버튼을 누르면 firmware 쓰기가 완료됩니다.