Differences

This shows you the differences between two versions of the page.

--- odroid-c2:software:android:release_note:v1.0 [2017/05/30 11:53]
luke.go ↷ Page moved from en:odroid-c2:software:android:release_note:v1.0 to odroid-c2:software:android:release_note:v1.0
+++ odroid-c2:software:android:release_note:v1.0 [2017/07/06 08:49] (current)
codewalker [Summary]
@@ Line 5: / Line 5: @@
 | Release Type | Regular release |
 | Release Files| [[http://dn.odroid.com/S905/Android/ODROID-C2/selfinstall-odroidc2-eng-s905_5.1.1_master-198-v1.0.img.xz|Self-installation Image]] (MD5SUM: c3d46b6cafb53b5b370c39f6666ca05c)|
-| | [[http://dn.odroid.com/S905/Android/ODROID-C2/daily-odroidc2-eng-s905_5.1.1_master-198-v1.0.tar.gz|Fastboot update]] (MD5SUM: 5ebae58156026a9c8f14d299a6460eea)|
 File name : selfinstall-odroidc2-eng-s905_5.1.1_master-198-v1.0.img
@@ Line 53: / Line 52: @@
 ===== Update Instruction =====
 ==== Self Installation ====
-You can install the release to your MicroSD or eMMC with the tool **dd** in Linux or **Win32DiskImager** in Windows. Please refer [[http://odroid.com/dokuwiki/doku.php?id=en:odroid_flashing_tools#using_win32diskimager|this]] for more detail.
+You can install the release to your [[odroid-c2:software:android:release_note:MicroSD]] or eMMC with the tool **dd** in Linux or **Win32DiskImager** in Windows. Please refer [[http://odroid.com/dokuwiki/doku.php?id=en:odroid_flashing_tools#using_win32diskimager|this]] for more detail.
 <WRAP center round important 80%>
 We've reported that some of users can not watch Android logo on their TV while installing even though installation is proceeded. So please wait for 5 minutes since power on and red and blue LED is on. If blue led is started blinking then installation is proceeding, ODROID-C1 will reboot when finished.
@@ Line 68: / Line 67: @@
 ==== Fastboot Update ====
-Your can update the release by **fastboot** if you have MicroSD or eMMC already Android installed. If you have **USB-Serial kit**, you can enter to **Fastboot** mode when you execute the command **fastboot** on U-boot command line. Or if you run execute **reboot fastboot** from Android shell command line, your **ODROID-C2** will reboot and get into **fastboot** mode immediately. You can check if your **ODROID-C2** is attached via USB with the command **fastboot devices** in your desktop.
+Your can update the release by **fastboot** if you have [[odroid-c2:software:android:release_note:MicroSD]] or eMMC already Android installed. If you have **USB-Serial kit**, you can enter to **Fastboot** mode when you execute the command **fastboot** on U-boot command line. Or if you run execute **reboot fastboot** from Android shell command line, your **ODROID-C2** will reboot and get into **fastboot** mode immediately. You can check if your **ODROID-C2** is attached via USB with the command **fastboot devices** in your desktop.
 <code>