Differences

This shows you the differences between two versions of the page.

--- en:xu4_cloudshell_ir_config [2015/08/02 22:51]
mdrjr
+++ en:xu4_cloudshell_ir_config [2015/08/02 22:56] (current)
mdrjr
@@ Line 1: / Line 1: @@
+====== Configuring the IR Sensor on Cloudshell ======
+===== Setup =====
+Use the automated tool to configure it. ([[https://github.com/mdrjr/cloudshell_ir|Github Project page]])
+<code>wget https://raw.githubusercontent.com/mdrjr/cloudshell_ir/master/install_ir.sh
+chmod +x install_ir.sh
+sudo ./install_ir.sh
+</code>
+===== Registering your own remote controller =====
+By default **ODROID CloudShell** package installs and configures the remote for Hardkernel's official remote what is selling for ODROID-C1. Open [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141637537661|this]] for the detail of default remote controller.
+Since **odroid-cloudshell** package is based on **lirc**, popular software package for IR remote controller, you can register your IR remote controller to ODROID CloudShell as well.
+You can check if you remote already have a pre-made configuration here: [[http://lirc.sourceforge.net/remotes/|LIRC Remote's Database]]
+Download the file matching your remote and save as **/etc/lirc/lircd.conf**
+If your remote doesn't have a pre-made config file, please refer the [[http://odroid.com/dokuwiki/doku.php?id=en:c1_lirc#registering_own_remote_controller|this]] for the instructions.