Differences

This shows you the differences between two versions of the page.

--- en:xu3_android_release_note_v4.6 [2017/04/13 16:05]
codewalker created
+++ en:xu3_android_release_note_v4.6 [2017/07/17 09:34] (current)
codewalker [No-EDID 1080P / Disable HPD]
@@ Line 13: / Line 13: @@
     - [[en:c2_app_launch_via_gpio_on_android|Application launching with GPIO trigger on Android]]
     - [[en:c2_gpio_key_wakeup|Power Off and Wake Up using GPIO Key Button]]
+  * Added a few requested USB-Multitouch VID/PID. [[http://forum.odroid.com/viewtopic.php?f=51&t=15495]]
+<code>
+/* ViewSonic HDMI capacitive Screen */
+#define USB_VENDOR_ID_VIEWSONIC2575    0x2575
+/* #define USB_DEVICE_ID_VIEWSONIC_TD2230      0x0401 */
+#define USB_DEVICE_ID_VIEWSONIC_TD2740 0x0402
+#define USB_DEVICE_ID_VIEWSONIC_TD2430 0x7317
+/*
+#define USB_VENDOR_ID_VIEWSONIC0408    0x0408
+#define USB_DEVICE_ID_VIEWSONIC_TD2220 0x3008
+*/
+#define USB_VENDOR_ID_VIEWSONIC1BFD    0x1BFD
+#define USB_DEVICE_ID_VIEWSONIC_TD2210V1       0x1568
+#define USB_VENDOR_ID_VIEWSONIC28C8    0x28C8
+#define USB_DEVICE_ID_VIEWSONIC_TD2210V2       0x4701
+#define USB_VENDOR_ID_VIEWSONIC0FB8    0x0FB8
+#define USB_DEVICE_ID_VIEWSONIC_TD2421 0x1109
+#define USB_VENDOR_ID_VIEWSONIC1FF7    0x1FF7
+#define USB_DEVICE_ID_VIEWSONIC_CDE7061T       0x0001
+#define USB_VENDOR_ID_VIEWSONIC13FF    0x13FF
+#define USB_DEVICE_ID_VIEWSONIC_EP5502T        0x0008
+/* Greatouch HDMI capacitive Screen */
+#define USB_VENDOR_ID_GREATOUCH        0x0547
+#define USB_DEVICE_ID_GREATOUCH_MT_8K  0x3001
+/* WAVESHARE HDMI capacitive Screen */
+#define USB_VENDOR_ID_WAVESHARE        0x0483
+#define USB_DEVICE_ID_WAVESHARE_10_1   0x5710
+/* SAMSUNG HDMI capacitive Screen */
+#define USB_VENDOR_ID_SAMSUNG_2619     0x2619
+#define USB_DEVICE_ID_LH65DMEXTBC      0x5620
+/* SAMSUNG HDMI capacitive Screen */
+#define USB_VENDOR_ID_SAMSUNG_04E8     0x04E8
+#define USB_DEVICE_ID_LH55PMFXTBC      0x20A6
+/* Planar PS5562T HDMI capacitive Screen */
+#define USB_VENDOR_ID_PLANAR_2309      0x2309
+#define USB_DEVICE_ID_PLANAR_PS5562T_TOUCH     0x1005
+</code>
 ==== Check your Firmware/kernel version to confirm whether the update was done correctly or not ====
 <code>
 root@odroidxu3:/ # getprop ro.build.version.incremental
-getprop ro.build.version.incremental
+eng.jenkins.20170413.140317
 root@odroidxu3:/ # uname -a
-Linux localhost 3.10.9-gd0b2f53 #13 SMP PREEMPT Mon Feb 6 12:02:10 KST 2017 armv7l GNU/Linux
+Linux localhost 3.10.9-g9824399 #20 SMP PREEMPT Thu Apr 13 15:55:14 KST 2017 armv7l GNU/Linux
 </code>
 ===== How to download the source code ======
@@ Line 145: / Line 193: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
 ==== 1024 X 600P(ODROID-VU7 Plus) No-EDID ====
 <file ini boot.ini>
@@ Line 263: / Line 310: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
 ==== No-EDID 1080P ====
 <file ini boot.ini>
@@ Line 368: / Line 414: @@
 setenv led_blink        "1"
+setenv disable_vu7 "false"
 # invert touch screen x,y
@@ Line 375: / Line 423: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
 ==== DVI 1280 x 1024 ====
 <file ini boot.ini>
@@ Line 493: / Line 540: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
@@ Line 583: / Line 630: @@
 setenv disable_vu7 "false"
+# invert touch screen x,y
+setenv touch_invert_x "false"
+setenv touch_invert_y "false"
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
 ===== Improve the WiFi dongle compatibility via editing "/system/etc/wifi_id_list.txt"=====
 Many ODROID-XU3/4 user use USB WiFi dongle with RTL8188CUS chipset purchased from their local electronic store. And we were asked how they can use their WiFi dongle on ODROID-XU3/4 and answered to add a like with below at the end of **wifi_id_list.txt** with their WiFi dongle's VID & PID. From Android release v2.4, we've added many USB WiFi dongles known product by default to the file, **wifi_id_list**. These list are collected from the driver source code itself supported and we shipped the driver, **8192cu.ko**.