Differences

This shows you the differences between two versions of the page.

--- en:xu3_android_release_note_v4.6 [2017/07/17 09:33]
codewalker [800 X 480P(ODROID-Vu7/Vu5) No-EDID No-HPD]
+++ en:xu3_android_release_note_v4.6 [2017/07/17 09:34]
codewalker [DVI 1280 x 1024]
@@ Line 310: / Line 310: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"boot
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
+boot
 </file>
 ==== No-EDID 1080P ====
 <file ini boot.ini>
@@ Line 423: / Line 423: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"boot
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
+boot
 </file>
 ==== DVI 1280 x 1024 ====
 <file ini boot.ini>
@@ Line 540: / Line 540: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"boot
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
+boot
 </file>
 ==== No-EDID 1080P / Disable HPD ====
 <file ini boot.ini>