Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
en:xu3_android_release_note_v2.8 [2015/09/17 14:32] codewalker [Check your Firmware/kernel version to confirm whether the update was done correctly or not] |
en:xu3_android_release_note_v2.8 [2015/09/18 13:52] (current) codewalker [Summary] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Release Note of Android (v2.8) ===== | ||
| + | ---- | ||
| + | ===== Summary ===== | ||
| + | | Release Date | Sep/18/2015 | | ||
| + | | Release Type | Regular release | | ||
| + | | Release Files | [[http://dn.odroid.com/5422/ODROID-XU3/Android/4.4.4_Alpha_2.8_Sep-18-2015/update.zip|update.zip]] (MD5SUM:521a16a904f2472b6eb267243760ba41)| | ||
| + | ===== New updates ===== | ||
| + | * Change the EDID interface to GPIO-driven-I2C from hardware-I2C to improve the display compatibility. | ||
| + | * Remove the HDCP feature for better HDMI/DVI compatibility. | ||
| + | * Add CDC Ethernet. | ||
| + | * Add USB Multitouch VID/PID requested. [[http://forum.odroid.com/viewtopic.php?f=51&t=15495]] | ||
| + | <code> | ||
| + | 919 /* Chalkboard Electronics 10" HDMI/USB Multitouch Screen */$ | ||
| + | 920 #define USB_VENDOR_ID_ELECTRONICS 0x04D8$ | ||
| + | 921 #define USB_DEVICE_ID_CHALKBOARD_10_TOUCH 0xF724$ | ||
| + | 922 $ | ||
| + | 923 /* Acer UT220HQL tbmjz HDMI/USB Multitouch Screen */$ | ||
| + | 924 #define USB_VENDOR_ID_ACER 0x25AA$ | ||
| + | 925 #define USB_DEVICE_ID_UT220HQL_TOUCH 0x8882$ | ||
| + | 926 $ | ||
| + | 927 /* eGalax Capacitive Multi-touch Screen */$ | ||
| + | 928 #define USB_VENDOR_ID_EGALAX 0x0EEF$ | ||
| + | 929 /* Xenarc 700CSH */$ | ||
| + | 930 #define USB_DEVICE_ID_700CSH_TOUCH 0x7200$ | ||
| + | 931 /* D_WAV Scientific Co.,Ltd */$ | ||
| + | 932 #define USB_DEVICE_ID_AT070TN90_TOUCH 0x0001$ | ||
| + | 933 /* Chalkboard Electronics 14" */$ | ||
| + | 934 #define USB_DEVICE_ID_CHALKBOARD_14_TOUCH 0xA107$ | ||
| + | 935 $ | ||
| + | 936 /* SINGWAY XWC1359 7'' USB capacitive Screen */$ | ||
| + | 937 #define USB_VENDOR_ID_SINGWAY 0x266E$ | ||
| + | 938 #define USB_DEVICE_ID_XWC1359_7_TOUCH 0x0101$ | ||
| + | </code> | ||
| + | ===== Known issue ===== | ||
| + | * The boot-animation is not correctly working in the portrait mode | ||
| + | * The expansion board does not support in this version. We are making a better GPIO/I2C/SPI drivers & HAL for Android platform now. | ||
| + | ==== Check your Firmware/kernel version to confirm whether the update was done correctly or not ==== | ||
| + | <code> | ||
| + | shell@odroidxu3:/ $ getprop | grep ro.build.version.incremental | ||
| + | [ro.build.version.incremental]: [eng.jenkins.20150917.120545] | ||
| + | shell@odroidxu3:/ $ uname -a | ||
| + | Linux localhost 3.10.9-gaaf190d #27 SMP PREEMPT Thu Sep 17 12:04:39 KST 2015 arx | ||
| + | shell@odroidxu3:/ $ | ||
| + | </code> | ||
| + | ===== How to checkout the source code ====== | ||
| + | <code> | ||
| + | $ repo init -u https://github.com/hardkernel/android.git -b 5422_4.4.4_master | ||
| + | $ repo sync | ||
| + | $ repo start 5422_4.4.4_master --all | ||
| + | </code> | ||
| + | ==== Linux Kernel ==== | ||
| + | We've merged the Kernel source into the Android repo. | ||
| + | Android build-script also includes the Kernel compile. | ||
| + | ==== Android Source ==== | ||
| + | $ ./build.sh odroidxu3 | ||
| + | |||
| + | |||
| + | ===== Reference boot.ini ===== | ||
| + | ==== No-EDID 1080P ==== | ||
| + | <file ini boot.ini> | ||
| + | ODROIDXU-UBOOT-CONFIG | ||
| + | |||
| + | # setenv fb_x_res "640" | ||
| + | # setenv fb_y_res "480" | ||
| + | # setenv hdmi_phy_res "480p60hz" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "489" | ||
| + | # setenv hdmi_phy_res "480p59.45" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "576" | ||
| + | # setenv hdmi_phy_res "576p50hz" | ||
| + | |||
| + | # setenv fb_x_res "800" | ||
| + | # setenv fb_y_res "600" | ||
| + | # setenv hdmi_phy_res "600p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "768" | ||
| + | # setenv hdmi_phy_res "768p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "800" | ||
| + | # setenv hdmi_phy_res "800p59hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "960" | ||
| + | # setenv hdmi_phy_res "960p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "1024" | ||
| + | # setenv hdmi_phy_res "1024p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p30hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p60hz" | ||
| + | |||
| + | setenv fb_x_res "1920" | ||
| + | setenv fb_y_res "1080" | ||
| + | setenv hdmi_phy_res "1080p60hz" | ||
| + | |||
| + | setenv edid "0" | ||
| + | |||
| + | setenv hpd "1" | ||
| + | |||
| + | setenv led_blink "1" | ||
| + | |||
| + | setenv bootcmd "movi read kernel 0 40008000;bootz 40008000" | ||
| + | |||
| + | setenv bootargs "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}" | ||
| + | boot | ||
| + | </file> | ||
| + | |||
| + | ==== DVI 1280 x 1024 ==== | ||
| + | <file ini boot.ini> | ||
| + | ODROIDXU-UBOOT-CONFIG | ||
| + | |||
| + | # setenv fb_x_res "640" | ||
| + | # setenv fb_y_res "480" | ||
| + | # setenv hdmi_phy_res "480p60hz" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "489" | ||
| + | # setenv hdmi_phy_res "480p59.45" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "576" | ||
| + | # setenv hdmi_phy_res "576p50hz" | ||
| + | |||
| + | # setenv fb_x_res "800" | ||
| + | # setenv fb_y_res "600" | ||
| + | # setenv hdmi_phy_res "600p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "768" | ||
| + | # setenv hdmi_phy_res "768p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "800" | ||
| + | # setenv hdmi_phy_res "800p59hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "960" | ||
| + | # setenv hdmi_phy_res "960p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "1024" | ||
| + | # setenv hdmi_phy_res "1024p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p30hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p60hz" | ||
| + | |||
| + | setenv fb_x_res "1280" | ||
| + | setenv fb_y_res "1024" | ||
| + | setenv hdmi_phy_res "1024p60hz" | ||
| + | |||
| + | setenv edid "0" | ||
| + | |||
| + | setenv hpd "1" | ||
| + | |||
| + | setenv led_blink "1" | ||
| + | |||
| + | setenv bootcmd "movi read kernel 0 40008000;bootz 40008000" | ||
| + | |||
| + | setenv bootargs "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}" | ||
| + | boot | ||
| + | </file> | ||
| + | ==== No-EDID 1080P / Disable HPD ==== | ||
| + | <file ini boot.ini> | ||
| + | ODROIDXU-UBOOT-CONFIG | ||
| + | |||
| + | # setenv fb_x_res "640" | ||
| + | # setenv fb_y_res "480" | ||
| + | # setenv hdmi_phy_res "480p60hz" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "489" | ||
| + | # setenv hdmi_phy_res "480p59.45" | ||
| + | |||
| + | # setenv fb_x_res "720" | ||
| + | # setenv fb_y_res "576" | ||
| + | # setenv hdmi_phy_res "576p50hz" | ||
| + | |||
| + | # setenv fb_x_res "800" | ||
| + | # setenv fb_y_res "600" | ||
| + | # setenv hdmi_phy_res "600p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "720" | ||
| + | # setenv hdmi_phy_res "720p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "768" | ||
| + | # setenv hdmi_phy_res "768p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "800" | ||
| + | # setenv hdmi_phy_res "800p59hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "960" | ||
| + | # setenv hdmi_phy_res "960p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1440" | ||
| + | # setenv fb_y_res "900" | ||
| + | # setenv hdmi_phy_res "900p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1280" | ||
| + | # setenv fb_y_res "1024" | ||
| + | # setenv hdmi_phy_res "1024p60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080i60hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p30hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p50hz" | ||
| + | |||
| + | # setenv fb_x_res "1920" | ||
| + | # setenv fb_y_res "1080" | ||
| + | # setenv hdmi_phy_res "1080p60hz" | ||
| + | |||
| + | setenv fb_x_res "1920" | ||
| + | setenv fb_y_res "1080" | ||
| + | setenv hdmi_phy_res "1080p60hz" | ||
| + | |||
| + | setenv edid "0" | ||
| + | |||
| + | setenv hpd "0" | ||
| + | |||
| + | setenv led_blink "1" | ||
| + | |||
| + | setenv bootcmd "movi read kernel 0 40008000;bootz 40008000" | ||
| + | |||
| + | setenv bootargs "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}" | ||
| + | boot | ||
| + | </file> | ||
| + | |||
| + | ===== Improve the WiFi dongle compatibility via editing "/system/etc/wifi_id_list.txt"===== | ||
| + | Many ODROID-XU3/4 user use USB WiFi dongle with RTL8188CUS chipset purchased from their local electronic store. And we were asked how they can use their WiFi dongle on ODROID-XU3/4 and answered to add a like with below at the end of **wifi_id_list.txt** with their WiFi dongle's VID & PID. From Android release v2.4, we've added many USB WiFi dongles known product by default to the file, **wifi_id_list**. These list are collected from the driver source code itself supported and we shipped the driver, **8192cu.ko**. | ||
| + | <file ini wifi_id_list.txt> | ||
| + | 0bda 8172 r8712u /system/lib/modules/r8712u.ko | ||
| + | 148f 5572 compat /system/lib/modules/backports/compat.ko | ||
| + | 148f 5572 cfg80211 /system/lib/modules/backports/cfg80211.ko | ||
| + | 148f 5572 mac80211 /system/lib/modules/backports/mac80211.ko | ||
| + | 148f 5572 rt2x00lib /system/lib/modules/backports/rt2x00lib.ko | ||
| + | 148f 5572 rt2x00usb /system/lib/modules/backports/rt2x00usb.ko | ||
| + | 148f 5572 rt2800lib /system/lib/modules/backports/rt2800lib.ko | ||
| + | 148f 5572 rt2800usb /system/lib/modules/backports/rt2800usb.ko | ||
| + | 0bda 8176 8192cu /system/lib/modules/8192cu.ko /* 8188cu 1*1 dongole */ | ||
| + | 0bda 8170 8192cu /system/lib/modules/8192cu.ko /* 8188CE-VAU USB minCard */ | ||
| + | 0bda 817e 8192cu /system/lib/modules/8192cu.ko /* 8188CE-VAU USB minCard */ | ||
| + | 0bda 817a 8192cu /system/lib/modules/8192cu.ko /* 8188cu Slim Solo */ | ||
| + | 0bda 817b 8192cu /system/lib/modules/8192cu.ko /* 8188cu Slim Combo */ | ||
| + | 0bda 817d 8192cu /system/lib/modules/8192cu.ko /* 8188RU High-power USB Dongle */ | ||
| + | 0bda 8754 8192cu /system/lib/modules/8192cu.ko /* 8188 Combo for BC4 */ | ||
| + | 0bda 817f 8192cu /system/lib/modules/8192cu.ko /* 8188RU */ | ||
| + | 0bda 818a 8192cu /system/lib/modules/8192cu.ko /* RTL8188CUS-VL */ | ||
| + | 0bda 018a 8192cu /system/lib/modules/8192cu.ko /* RTL8188CTV */ | ||
| + | 0bda 17c0 8192cu /system/lib/modules/8192cu.ko /* RTK demoboard - USB-N10E */ | ||
| + | 0bda 8177 8192cu /system/lib/modules/8192cu.ko /* 8191cu 1*2 */ | ||
| + | 0bda 8178 8192cu /system/lib/modules/8192cu.ko /* 8192cu 2*2 */ | ||
| + | 0bda 817c 8192cu /system/lib/modules/8192cu.ko /* 8192CE-VAU USB minCard */ | ||
| + | 0bda 8191 8192cu /system/lib/modules/8192cu.ko /* 8192CU 2*2 */ | ||
| + | 1058 0631 8192cu /system/lib/modules/8192cu.ko /* Alpha, 8192CU */ | ||
| + | 2019 ed17 8192cu /system/lib/modules/8192cu.ko /* PCI - Edimax */ | ||
| + | 0df6 0052 8192cu /system/lib/modules/8192cu.ko /* Sitecom - Edimax */ | ||
| + | 7392 7811 8192cu /system/lib/modules/8192cu.ko /* Edimax - Edimax */ | ||
| + | 07b8 8189 8192cu /system/lib/modules/8192cu.ko /* Abocom - Abocom */ | ||
| + | 0eb0 9071 8192cu /system/lib/modules/8192cu.ko /* NO Brand - Etop */ | ||
| + | 06f8 e033 8192cu /system/lib/modules/8192cu.ko /* Hercules - Edimax */ | ||
| + | 103c 1629 8192cu /system/lib/modules/8192cu.ko /* HP - Lite-On ,8188CUS Slim Combo */ | ||
| + | 2001 3308 8192cu /system/lib/modules/8192cu.ko /* D-Link - Alpha */ | ||
| + | 050d 1102 8192cu /system/lib/modules/8192cu.ko /* Belkin - Edimax */ | ||
| + | 2019 ab2a 8192cu /system/lib/modules/8192cu.ko /* Planex - Abocom */ | ||
| + | 20f4 648b 8192cu /system/lib/modules/8192cu.ko /* TRENDnet - Cameo */ | ||
| + | 4855 0090 8192cu /system/lib/modules/8192cu.ko /* - Feixun */ | ||
| + | 13d3 3357 8192cu /system/lib/modules/8192cu.ko /* - AzureWave */ | ||
| + | 0df6 005c 8192cu /system/lib/modules/8192cu.ko /* Sitecom - Edimax */ | ||
| + | 0bda 5088 8192cu /system/lib/modules/8192cu.ko /* Thinkware - CC&C */ | ||
| + | 4856 0091 8192cu /system/lib/modules/8192cu.ko /* NetweeN - Feixun */ | ||
| + | 0846 9041 8192cu /system/lib/modules/8192cu.ko /* Netgear - Cameo */ | ||
| + | 2019 4902 8192cu /system/lib/modules/8192cu.ko /* Planex - Etop */ | ||
| + | 2019 ab2e 8192cu /system/lib/modules/8192cu.ko /* SW-WF02-AD15 -Abocom */ | ||
| + | 2001 330b 8192cu /system/lib/modules/8192cu.ko /* D-LINK - T&W */ | ||
| + | cdab 8010 8192cu /system/lib/modules/8192cu.ko /* - - compare */ | ||
| + | 0b05 17ba 8192cu /system/lib/modules/8192cu.ko /* ASUS - Edimax */ | ||
| + | 0bda 1e1e 8192cu /system/lib/modules/8192cu.ko /* Intel - - */ | ||
| + | 04bb 094c 8192cu /system/lib/modules/8192cu.ko /* I-O DATA - Edimax */ | ||
| + | cdab 8011 8192cu /system/lib/modules/8192cu.ko /* - - compare */ | ||
| + | 0bda 0a8a 8192cu /system/lib/modules/8192cu.ko /* Sony - Foxconn */ | ||
| + | 0bda 317f 8192cu /system/lib/modules/8192cu.ko /* Netcore,Netcore */ | ||
| + | 13d3 3359 8192cu /system/lib/modules/8192cu.ko /* - Azwave */ | ||
| + | 13d3 3358 8192cu /system/lib/modules/8192cu.ko /* - Azwave */ | ||
| + | 04f2 aff7 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 04f2 aff9 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 04f2 affa 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 04f2 aff8 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 04f2 affb 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 04f2 affc 8192cu /system/lib/modules/8192cu.ko /* XAVI - XAVI */ | ||
| + | 2019 1201 8192cu /system/lib/modules/8192cu.ko /* Planex - Vencer */ | ||
| + | 2001 3307 8192cu /system/lib/modules/8192cu.ko /* D-Link - Cameo */ | ||
| + | 2001 330a 8192cu /system/lib/modules/8192cu.ko /* D-Link - Alpha */ | ||
| + | 2001 3309 8192cu /system/lib/modules/8192cu.ko /* D-Link - Alpha */ | ||
| + | 0586 341f 8192cu /system/lib/modules/8192cu.ko /* Zyxel - Abocom */ | ||
| + | 7392 7822 8192cu /system/lib/modules/8192cu.ko /* Edimax - Edimax */ | ||
| + | 2019 ab2b 8192cu /system/lib/modules/8192cu.ko /* Planex - Abocom */ | ||
| + | 07b8 8178 8192cu /system/lib/modules/8192cu.ko /* Abocom - Abocom */ | ||
| + | 07aa 0056 8192cu /system/lib/modules/8192cu.ko /* ATKK - Gemtek */ | ||
| + | 4855 0091 8192cu /system/lib/modules/8192cu.ko /* - Feixun */ | ||
| + | 050d 2102 8192cu /system/lib/modules/8192cu.ko /* Belkin - Sercomm */ | ||
| + | 050d 2103 8192cu /system/lib/modules/8192cu.ko /* Belkin - Edimax */ | ||
| + | 20f4 624d 8192cu /system/lib/modules/8192cu.ko /* TRENDnet */ | ||
| + | 0df6 0061 8192cu /system/lib/modules/8192cu.ko /* Sitecom - Edimax */ | ||
| + | 0b05 17ab 8192cu /system/lib/modules/8192cu.ko /* ASUS - Edimax */ | ||
| + | 0846 9021 8192cu /system/lib/modules/8192cu.ko /* Netgear - Sercomm */ | ||
| + | 0846 f001 8192cu /system/lib/modules/8192cu.ko /* Netgear - Sercomm */ | ||
| + | 0e66 0019 8192cu /system/lib/modules/8192cu.ko /* Hawking,Edimax */ | ||
| + | 0e66 0020 8192cu /system/lib/modules/8192cu.ko /* Hawking - Edimax */ | ||
| + | 050d 1004 8192cu /system/lib/modules/8192cu.ko /* Belkin - Edimax */ | ||
| + | 0bda 2e2e 8192cu /system/lib/modules/8192cu.ko /* Intel - - */ | ||
| + | 2357 0100 8192cu /system/lib/modules/8192cu.ko /* TP-Link - TP-Link */ | ||
| + | 06f8 e035 8192cu /system/lib/modules/8192cu.ko /* Hercules - Edimax */ | ||
| + | 04bb 0950 8192cu /system/lib/modules/8192cu.ko /* IO-DATA - Edimax */ | ||
| + | 0df6 0070 8192cu /system/lib/modules/8192cu.ko /* Sitecom - Edimax */ | ||
| + | 0789 016d 8192cu /system/lib/modules/8192cu.ko /* LOGITEC - Edimax */ | ||
| + | 0bda 8186 8192cu /system/lib/modules/8192cu.ko /* Intel-Xavi( Azwave) */ | ||
| + | </file> | ||
