Differences

This shows you the differences between two versions of the page.

--- en:spi_lcdshiled:autoconsole [2016/12/21 14:58]
john1117 created
+++ en:spi_lcdshiled:autoconsole [2016/12/21 16:53] (current)
john1117 [1. Module settings]
@@ Line 1: / Line 1: @@
 ====== Automatically start console mode ======
 Start the system console on the LCD automatically after booting.
-===== Module settings =====
+===== 1. Module settings =====
 Add following line in "/etc/modprobe.d/lcd32.conf" file.
   options fbtft_device name=odroid32 rotate=90 busnum=1 gpios=reset:21,dc:22 speed=32000000 cs=0
@@ Line 7: / Line 7: @@
   spi_s3c64xx
   fbtft_device
+Edit "/etc/modprobe.d/blacklist-odroid.comf" file. **(Only Ubuntu 16.04 or higher is required)**\\
+Comment the spi lines out.\\
+<code>
+...
+...
+#blacklist spidev
+#blasklist spi_s3c64xx
+...
+...
+</code>
+===== 2. Virtual terminal setting =====
+Add following line in "/etc/rc.local" file.
+  chvt 1
+===== 3. Auto login on console [16.04] =====
+Edit tty1 service
+  sudo systemctl edit getty@tty1
+And add
+  [Service]
+  ExecStart=
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
+  odroid@odroid:~$ sudo systemctl cat getty@tty1 | grep Exec
+  ExecStart=-/sbin/agetty --noclear %I $TERM
+  ExecStart=
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
+Restart tty1 service
+  sudo systemctl restart getty@tty1