Differences

This shows you the differences between two versions of the page.

--- en:show_tutorial [2014/12/17 17:05]
john1117
+++ en:show_tutorial [2014/12/17 17:05] (current)
john1117
@@ Line 1: / Line 1: @@
+===== ODROID-SHOW Tutorial on ubuntu =====
+First download the ODROID-SHOW source code with github.\\
+Then add libraries after install the arduino IDE.\\
+Finally after **connecting jumper**, compile and upload.
+==== Download the ODROID-SHOW source code ====
+<code>
+> sudo apt-get install git
+> cd ~/work
+> git clone https://github.com/hardkernel/ODROID-SHOW
+</code>
+==== Install the arduino IDE ====
+Launch Ubuntu Software Center, search for "arduino", and install it
+{{:en:software_center.png?500|}}
+==== Run arduino IDE ====
+Open "show_main.ino" sketch file in this path.\\
+ODROID-SHOW/show_main/show_main.ino
+==== Setting Preferences ====
+You need to locate sketchbook path to the ODROID-SHOW.
+{{:en:preferences.png?500|}}
+==== Add Libraries ====
+Execute show_main source code with arduino IDE.\\
+You can add the libraries in the IDE through the menu skech -> import Library... -> Add Library...
+{{:en:add_library.png?500|}}
+The following way, add ODROID-SHOW folder. (sketchbook folder)
+{{:en:add_library2.png?500|}}
+==== Compile and Upload ====
+Check the serial port between /dev/ttyUSBn and "tools -> Serial Port" of arduino IDE.
+<code>
+> ls /dev/ttyUSB*
+</code>
+{{:en:check_serialport.png?500|}}
+Finally after connecting the jumper, click "upload" button of arduino IDE after click Verify button or "Ctrl + R".