This is an old revision of the document!
Table of Contents
Writing bootloader with PICkit 3
MPLAB IDE Download & Install
http://www.microchip.com/mplab/mplab-x-ide
Run MPLABX installer
You can write a firmware using MPLAB IDE or IPE
Writing bootloader with MPLAB IPE
Run MPLAB IPE
Select device and tool
Family : Advanced 8-bit MCUs (PIC18) Device : PIC18F45K50 Tool : PICkit3
Connect power to your USB-IOBOARD using microUSB cable
Then, connect PICkit3.
Apply && Connect
Bootloader Download
Select the bootloader hex file.
Run Program