Differences

This shows you the differences between two versions of the page.

--- en:c2_bootlogo [2016/07/11 10:10]
joy.cho [Logo File Format]
+++ en:c2_bootlogo [2017/05/15 08:40] (current)
odroid [How to replace boot logo with your custom image]
@@ Line 7: / Line 7: @@
 <code>
-Image Format : 24-bit Windows BMP image or 24-bit Windows Gzipped BMP image
+Image Format : 24-bit Windows BMP image or 24-bit Windows Gzipped BMP image (Without meta-data)
 Image Size : 1280 by 720
-Bit Depth : 24bpp
+Color Depth : 24bpp
 The file name should be 'boot-logo.bmp' or 'boot-logo.bmp.gz'
 </code>
@@ Line 16: / Line 16: @@
 {{:en:boot-logo.bmp.gz|}}
-If you're using GIMP, keep the options as following.
+We recommend using GIMP or KolourPaint.
+If you're using "GIMP", keep the options as following.
 <code>
 - Export as Windows BMP
@@ Line 73: / Line 76: @@
 $ fastboot flash logo boot-logo.bmp
 </code>
+<WRAP center round important>
+If you will use bmp data on logo partition, make sure there is NO boot-logo.bmp.gz file on your VFAT area, because U-Boot checks very first if there is boot-logo.bmp.gz on VFAT area and then check logo partition.\\
+You need this special cable to access the U-boot command.\\
+[[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G134111883934]]
+You also need a normal micro-USB cable for the fastboot/adb interface between C2 and your host PC too.\\
+[[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G134114594259]]
+</WRAP>
 === Ubuntu ===