Differences

This shows you the differences between two versions of the page.

--- en:c2_auto_detect_display [2017/03/07 11:21]
odroid [Display Auto Detection using EDID]
+++ en:c2_auto_detect_display [2017/03/21 14:05] (current)
joy.cho [VU8C edid issue]
@@ Line 8: / Line 8: @@
   - [[en:c2_auto_detect_display#information_binaries_for_debugging  | Information binaries for debugging ]]
   - [[en:c2_auto_detect_display#brief_sequence_diagram | Brief Sequence Diagram ]]
+  - [[en:c2_auto_detect_display#vu8c_edid_issue | VU8C edid support ]]
 <WRAP left round tip 80%>
@@ Line 15: / Line 16: @@
 <WRAP left round tip 80%>
-* If you want to **configure the resolution manually**,\\
+If you want to **configure the resolution manually**,\\
-Change the display_autodetect option to "false" in boot.ini file.
+Change the **display_autodetect** option to **"false"** in boot.ini file.
+</WRAP>
+<WRAP left round tip 80%>
+For 8-inch touch display **VU8C** users,\\
+If there is an issue of clipped-image in the right side with VU8C, please refer to the following link.\\
+http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display#vu8c_edid_issue
 </WRAP>
 ==== Setting Boot ini ====
@@ Line 297: / Line 304: @@
 (refer to E-EDID standard, Section 6.2)
+==== VU8C edid issue  ====
+In some amount of VU8C monitors, the edid data has an unneeded resolution, 1152x768 except 1024x768,\\
+so when using display auto detection mode, some part of right side display image can be clipped.\\
+If you have the issue, please set a display mode as "Manual mode" and "1024x768p60hz" as following,\\
+then you can see the normal display without the problem.
+<code>
+# Display Auto Detection
+# "false" or "true"
+setenv display_autodetect "false"
+...
+...
+# setenv m "1080p60hz" # Progressive 60Hz
+setenv m "1024x768p60hz"
+</code>
+Or if you want to update edid data of your VU8C converter board, please find the below link.\\
+We're preparing to release a new edid data binary by adjust the detailed timing table to fix ODROID-C2 display auto detection issue.\\
+Once we've done, the update status will be specified here.\\
+http://odroid.com/dokuwiki/doku.php?id=en:vu8_update_edid&s[]=vu8c