Differences

This shows you the differences between two versions of the page.

--- en:c1_android_release_note_v2.0 [2015/10/16 10:32]
tobetter [Summary]
+++ en:c1_android_release_note_v2.0 [2017/07/06 09:01] (current)
codewalker [Summary]
@@ Line 5: / Line 5: @@
 | Release Type | Regular release |
 | Release Files| [[http://dn.odroid.com/S805/Android/ODROID-C/selfinstall-odroidc-eng-s805_4.4.2_master-391-v2.0.img.xz|Self-installation Image]] (MD5SUM: 90b9b3b4d9b80ccba5ea4894e345d469)|
-| | [[http://dn.odroid.com/S805/Android/ODROID-C/daily-odroidc-eng-s805_4.4.2_master-391-v2.0.tar.gz|Fastboot update]] (MD5SUM: 3a0dfa0aec4b08d5f84742d3ec9b5366)|
 Android release 2.0 can be upgraded through network from the earlier version, v1.7 for example, please read [[http://odroid.com/dokuwiki/doku.php?id=en:c1_android_release_note_v2.0#upgrade_installation|this]] for more detail.
 ===== New updates =====
-  * Fix to play MJPEG streams on USB camera preview
+  * Fix to play MJPEG streams for must faster USB camera preview
   * Preinstalled Kodi is upgraded to 15.1.1
   * Android OTA upgrade is supported
@@ Line 14: / Line 14: @@
     * http://forum.odroid.com/viewtopic.php?f=113&t=16804&p=109708&hilit=amvideocap#p109708
   * PL2303 driver is included
-  * DWave Touch screen support
+  * DWave 7-inch HDMI Touch screen support
   * Multi touch support is enhanced
   * HDMI PLL is updated for particular resolution (480P/I, 576P/I, 1600x900P60HZ)
@@ Line 20: / Line 20: @@
   * Fix to support UHS-I on soft reset (ODROID-C1+ only)
 {{ :en:odroidc1-391-v2.0-version.png?direct&800 |}}
+===== Notes for the ODROID-VU7 =====
+If you use the low resolution screen like the ODROID-VU7, you need to edit the lcd_density value manually to show the navigation bar properly.\\
+Change "ro.sf.lcd_density=160" to "ro.sf.lcd_density=120" in build.prop file.
+$ su \\
+# mount -o rw,remount /system \\
+# vi /system/build.prop \\
+# reboot \\
 ===== Update Instruction =====
 ==== Self Installation ====
@@ Line 71: / Line 81: @@
 $ git clone --depth 1 https://github.com/codewalkerster/android_packages_apps_Utility.git -b s805_4.4.2_dev_master
 </code>
+===== Reference boot.ini =====
+<file ini boot.ini>
+ODROIDC-UBOOT-CONFIG
+# Resolution Configuration
+# 'hdmimode' must be one of below to configure display resolution within
+# supported by your TV or monitor.
+#    Symbol           | Resolution
+# --------------------+-------------
+#    "vga"            | 640x480
+#    "480p"           | 720x480
+#    "576p"           | 720x576
+#    "800x480p60hz"   | 800x480
+#    "800x600p60hz"   | 800x600
+#    "1024x600p60hz"  | 1024x600
+#    "1024x768p60hz"  | 1024x768
+#    "1080i50hz"      | 1080I@50Hz
+#    "1080p24hz"      | 1080P@24Hz
+#    "1080p50hz"      | 1080P@50Hz
+#    "1080p"          | 1080P@60Hz
+#    "720p"           | 1280x720
+#    "800p"           | 1280x800
+#    "sxga"           | 1280x1024
+#    "1360x768p60hz"  | 1360x768
+#    "1366x768p60hz"  | 1366x768
+#    "1440x900p60hz"  | 1440x900
+#    "1600x900p60hz"  | 1600x900
+#    "1680x1050p60hz" | 1680x1050
+#    "1920x1200"      | 1920x1200
+setenv hdmimode "720p"
+# HDMI/DVI Mode Configuration
+# This will enforce the singal type of display
+# "hdmi" - For HDMI interface
+# "dvi"  - For DVI interface
+setenv vout_mode "hdmi"
+# Overscan offset configuration
+# All offsets are zero and can be tuned by manual or ODROID Utility
+setenv top "0"
+setenv left "0"
+setenv bottom "0"
+setenv right "0"
+# UHS Card Configuration
+# Uncomment the line below to __DISABLE__ UHS-1 MicroSD support
+# This might break boot for some brand/models of cards.
+#setenv disableuhs "disableuhs"
+# CEC Configuration
+setenv cecconfig "cecf"
+setenv edid "1"
+# Booting
+setenv bootargs "root=/dev/mmcblk0p2 rw console=ttyS0,115200n8 no_console_suspend vdaccfg=${vdac_config} logo=osd1,loaded,${fb_addr},${outputmode},full hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig} vout=${vout_mode} edid=${edid} ${disableuhs} overscan_top=${top} overscan_left=${left} overscan_bottom=${bottom} overscan_right=${right} androidboot.serialno=${fbt_id#}"
+setenv bootcmd "movi read boot 0 0x12000000; movi read dtb 0 0x12800000; bootm 0x12000000 - 0x12800000"
+run bootcmd
+</file>