Cloudshell LCD Configuration

Cloudshell features a 2.2“ TFT LCD with a 320×240 resolution. The display is controlled by the well-known ILI9340 controller.

It uses SPI @ 40Mhz to talk with the LCD. (SPI 1)

Where to buy

Before attempting this guide, please make sure you are running the latest kernel.

You can update your kernel using ODROID Utility.

sudo -s
echo "options fbtft_device name=hktft9340 busnum=1 rotate=270" > /etc/modprobe.d/odroid-cloudshell.conf
echo "spi_s3c64xx" >> /etc/modules
echo "fbtft_device" >> /etc/modules

The commands above will ensure that at every boot the LCD is configured.

Reboot the board with HDMI cable disconnected and you should see already information going to the 2.2” LCD.