//------------------------------------------------------------------------------
//
// bmp180 of Weather-Board with 16x2 lcd Application.
//
// Defined port number is wiringPi port number.
//
// Compile : gcc -o <create excute file name> <source file name> -lwiringPi
//							-lwiringPiDev -lpthread
// Run : sudo ./<created excute file name>
//
//------------------------------------------------------------------------------
 
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
 
#include <unistd.h>
#include <string.h>
#include <time.h>
 
#include <wiringPi.h>
#include <lcd.h>
 
#define LCD_ROW			2   // 16 Char
#define LCD_COL			16  // 2 Line
#define LCD_BUS			4   // Interface 4 Bit mode
#define LCD_UPDATE_PERIOD	300 // 300ms
 
#define PORT_LCD_RS	7   // GPIOY.BIT3(#83)
#define PORT_LCD_E	0   // GPIOY.BIT8(#88)
#define PORT_LCD_D4	2   // GPIOX.BIT19(#116)
#define PORT_LCD_D5	3   // GPIOX.BIT18(#115)
#define PORT_LCD_D6	1   // GPIOY.BIT7(#87)
#define PORT_LCD_D7	4   // GPIOX.BIT7(#104)
 
static unsigned char lcdFb[LCD_ROW][LCD_COL] = {0, };
unsigned char temperature[10] = {0, };
unsigned char pressure[10] = {0, };
 
static int lcdHandle = 0;
static int ledPos = 0;
 
static const char *bmp180_node[] = {
	"/sys/bus/i2c/drivers/bmp085/1-0077/temp0_input",
	"/sys/bus/i2c/drivers/bmp085/1-0077/pressure0_input",
};
 
static void getSysInfo(void)
{
	int n, tempfd, pressurefd;
 
	tempfd = open(bmp180_node[0], O_RDONLY);
	read(tempfd, temperature, 10);
	pressurefd = open(bmp180_node[1], O_RDONLY);
	read(pressurefd, pressure, 10);
 
	close(tempfd);
	close(pressurefd);
}
 
static void lcd_update (void)
{
	int i, j;
 
	memset((void *)&lcdFb, ' ', sizeof(lcdFb));
 
	getSysInfo();
	sprintf(lcdFb[0], "%.1f *C", atof(temperature)/10);
	sprintf(lcdFb[1], "%.2f hPa", atof(pressure)/100);
 
	lcdFb[0][strlen(lcdFb[0])] = ' ';
	lcdFb[1][strlen(lcdFb[1])] = ' ';
 
	for(i = 0; i < LCD_ROW; i++) {
		lcdPosition (lcdHandle, 0, i);
		for(j = 0; j < LCD_COL; j++)
			lcdPutchar(lcdHandle, lcdFb[i][j]);
	}
}
 
int system_init(void)
{
	int i, j;
 
	// LCD Init   
	lcdHandle = lcdInit(LCD_ROW, LCD_COL, LCD_BUS,
				PORT_LCD_RS, PORT_LCD_E,
				PORT_LCD_D4, PORT_LCD_D5,
				PORT_LCD_D6, PORT_LCD_D7, 0, 0, 0, 0);
 
	if(lcdHandle < 0) {
		fprintf(stderr, "%s : lcdInit failed!\n", __func__);
		return -1;
	}
 
	return 0;
}
 
int main (int argc, char *argv[])
{
	int timer = 0 ;
 
	wiringPiSetup ();
 
	if (system_init() < 0) {
		fprintf (stderr, "%s: System Init failed\n", __func__);
		return -1;
	}
 
	for(;;) {
                usleep(100000);
		if (millis () < timer)
			continue ;
		timer = millis () + LCD_UPDATE_PERIOD;
 
		// lcd update
		lcd_update();
	}
 
	return 0 ;
}