Table of Contents
ODROID-SHOW Tutorial on ubuntu
First download the ODROID-SHOW source code with github.
Then add libraries after install the arduino IDE.
Finally after connecting jumper, compile and upload.
Download the ODROID-SHOW source code
> sudo apt-get install git > cd ~/work > git clone https://github.com/hardkernel/ODROID-SHOW
Install the arduino IDE
Launch Ubuntu Software Center, search for “arduino”, and install it
Run arduino IDE
Open “show_main.ino” sketch file in this path.
ODROID-SHOW/show_main/show_main.ino
Setting Preferences
You need to locate sketchbook path to the ODROID-SHOW.
Add Libraries
Execute show_main source code with arduino IDE.
You can add the libraries in the IDE through the menu skech → import Library… → Add Library…
The following way, add ODROID-SHOW folder. (sketchbook folder)
Compile and Upload
Check the serial port between /dev/ttyUSBn and “tools → Serial Port” of arduino IDE.
> ls /dev/ttyUSB*
Finally after connecting the jumper, click “upload” button of arduino IDE after click Verify button or “Ctrl + R”.
