U-boot

Click one of the site to download toolchain to build U-boot. Please note that this toolchain is for U-boot, there is another toolchain to build Linux kernel.

• Download #1
• Download #2

Once the download is done, extract the tarball to /opt/toolchains/.

$ sudo mkdir -p /opt/toolchains
$ sudo tar xJvf gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz -C /opt/toolchains/

In order to add the toolchain path to PATH, paste below lines to $HOME/.bashrc.

export PATH=/opt/toolchains/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin:$PATH

You can apply the change if you login again or import to apply this change, login again or evaluate $HOME/.bashrc with source command.

$ source ~/.bashrc

You can check if the toolchain installed above works properly while checking the version of toolchain. If you can find gcc version 4.8.3 20140401 (prerelease) at the end of the line, the toolchain is well installed.

$ arm-none-eabi-gcc -v
Using built-in specs.
COLLECT_GCC=arm-none-eabi-gcc
COLLECT_LTO_WRAPPER=/opt/toolchains/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin/../libexec/gcc/arm-none-eabi/4.8.3/lto-wrapper
Target: arm-none-eabi
Configured with: /cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/src/gcc-linaro-4.8-2014.04/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-none-eabi --prefix=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/install --with-local-prefix=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/install/arm-none-eabi --without-headers --with-newlib --enable-threads=no --disable-shared --with-pkgversion='crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04' --with-bugurl=https://bugs.launchpad.net/gcc-linaro --disable-__cxa_atexit --with-gmp=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --with-mpfr=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --with-mpc=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --with-isl=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --with-cloog=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --with-libelf=/cbuild/slaves/oorts/crosstool-ng/builds/arm-none-eabi-linux/.build/arm-none-eabi/build/static --enable-lto --enable-linker-build-id --enable-libmudflap --disable-libgomp --enable-libssp --disable-libstdcxx-pch --enable-multilib --enable-languages=c,c++,fortran --with-multilib-list=aprofile
Thread model: single
gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) 

You can checkout U-boot source tree from Hardkernel's Github.

$ git clone https://github.com/hardkernel/u-boot.git -b odroidc-v2011.03

Before you compile U-boot, you must configure for ODROID-C1 with following command,
and then compile.

For Ubuntu and Android, the different config option is used.

$ cd u-boot
$ make odroidc_config
$ make

$ cd u-boot
$ make odroidc_rev2_config
$ make

$ cd u-boot
$ make odroidc_config
$ make

The bootloader for ODROID-C1 is consisted with two part, 1st stage bootloader + U-boot. You can find u-boot.bin once you compile U-boot, as well as bl1.bin.hardkernel in the directory sd_fuse/. Both binaries must be installed in a card (eMMC or MicroSD).

We provide the script, sd_fuse/sd_fusing.sh, this helps you to install the bootloader into your blank card eMMC or MicroSD.

1. Insert your card to USB card reader and attach to USB host port of your desktop.
2. Check the device path of your USB card reader.
3. Install the bootloader binaries using sd_fuse/sd_fusing.sh.

$ cd sd_fuse
$ ./sd_fusing.sh <device/path/of/your/card>

If you can boot your ODROID-C1 already and want to install a new u-boot.bin built by you. Fastboot helps you to install a u-boot.bin into your board.

$ sudo fastboot flash bootloader sd_fuse/u-boot.bin

If installation is done, you care reboot your ODROID-C1 with fastboot.

$ fastboot reboot

You also can update U-boot from Linux with dd command. After building U-boot, copy u-boot.bin into your ODROID-C1. Then do the command below in order to flash your U-boot image to MicroSD or eMMC.

$ sudo dd if=u-boot.bin of=/dev/mmcblk0 bs=512 seek=64
$ sudo sync