Differences

This shows you the differences between two versions of the page.

--- en:xu4_cloudshell2:easy_install [2017/04/20 17:13]
john1117
+++ en:xu4_cloudshell2:easy_install [2017/04/20 17:16] (current)
john1117
@@ Line 2: / Line 2: @@
 {{:en:raid_select.png?600|}}
-There are four data storage modes on the CloudShell-2:  **//RAID 0, RAID 1, SPAN//** and **//PM//**.  This means that the hard disks will be detected separately in PM mode.\\
+There are four data storage modes on the CloudShell2:  **//RAID 0, RAID 1, SPAN//** and **//PM//**.  This means that the hard disks will be detected separately in PM mode.\\
 To select the RAID mode, set the RAID Mode DIP Switch to the setting that you want, then apply power while pressing the RAID Setup Key button until booting is complete.
@@ Line 15: / Line 15: @@
   wget https://github.com/john1117/cloudshell2-fan/raw/master/cloudshell2-fan_20170420-1_armhf.deb
   sudo dpkg -i cloudshell2-fan_20170420-1_armhf.deb
+=== 3. Configure the IR Sensor ===
+Use the automated tool to configure it. ([[https://github.com/mdrjr/cloudshell_ir|Github Project page]])
+<code>wget https://raw.githubusercontent.com/mdrjr/cloudshell_ir/master/install_ir.sh
+chmod +x install_ir.sh
+sudo ./install_ir.sh
+</code>
 CloudShell2 server LCD configuration
   wget https://github.com/john1117/cloudshell-lcd/raw/master/cloudshell-lcd_20170420-4_armhf.deb
   sudo dpkg -i cloudshell-lcd_20170420-4_armhf.deb