Differences

This shows you the differences between two versions of the page.

--- en:c2_auto_detect_display [2017/02/20 10:03]
joy.cho [Setting Boot ini]
+++ en:c2_auto_detect_display [2017/03/21 14:05] (current)
joy.cho [VU8C edid issue]
@@ Line 3: / Line 3: @@
 There are a variety of issue related to setting display mode with various monitors\\
 and the available display modes that are provided on ODROID-C2 are limited to support all of them.\\
-So, we are planning to release 'Display auto detection functionality using EDID on U-Boot stage'.\\
+This wiki page introduces 'Display auto detection functionality using EDID of monitors'.\\
   - [[en:c2_auto_detect_display#setting_boot_ini | How to modify boot.ini with 'display_autodetect' ]]
   - [[en:c2_auto_detect_display#information_binaries_for_debugging  | Information binaries for debugging ]]
   - [[en:c2_auto_detect_display#brief_sequence_diagram | Brief Sequence Diagram ]]
-  - [[en:c2_auto_detect_display#how_to_update_u-boot| How to manually update u-boot that supports display auto detection functionality ]]
+  - [[en:c2_auto_detect_display#vu8c_edid_issue | VU8C edid support ]]
 <WRAP left round tip 80%>
-* **Ubuntu** : Please find the instruction for display auto detection in the end section of this wiki page. it is a beta test version so far.\\
+* **Ubuntu** : Version 3.14.79-108 (Feb 27, 2017) or higher version is available.\\
-The new version including display auto detection will be released soon.\\
+* **Android** : Android 5.1.1 (v3.3) / 6.0.1 (v2.2) or higher version is available.
+</WRAP>
-* **Android** : __Android 5.1.1 (v3.3)__ or higher version is available officially.
+<WRAP left round tip 80%>
+If you want to **configure the resolution manually**,\\
+Change the **display_autodetect** option to **"false"** in boot.ini file.
 </WRAP>
+<WRAP left round tip 80%>
+For 8-inch touch display **VU8C** users,\\
+If there is an issue of clipped-image in the right side with VU8C, please refer to the following link.\\
+http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display#vu8c_edid_issue
+</WRAP>
 ==== Setting Boot ini ====
@@ Line 24: / Line 32: @@
 <WRAP center round important>
 With the official version including display auto detection, default mode is set as "display_autodetect is true".\\
-If you want to use the existing manual setting mode, modify display_autodetect to false.\\
+If you want to use the existing manual setting mode, modify display_autodetect to false\\
+and uncomment the mode to be set.
 **
@@ Line 30: / Line 39: @@
 setenv display_autodetect "true"**
 \\
 or
 \\
 **
 # 2. to use existing manual display mode\\
+setenv m "1080p60hz" \\
+...\\
 setenv display_autodetect "false" **
 </WRAP>
@@ Line 92: / Line 105: @@
 # setenv m "custombuilt"
 # setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
+# Auto Detection of Monitor settings based on your Screen information
+# See: http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display
+setenv display_autodetect "true"
 # 480 Lines (720x480)
@@ Line 156: / Line 173: @@
 # setenv vout "dvi"
 # setenv vout "vga"
-# Display Auto Detection
-# "false" or "true"
-setenv display_autodetect "true"
 # HDMI HotPlug Detection control
@@ Line 194: / Line 207: @@
 # Only enable this if you use it.
 setenv usbmulticam "false"
+# Disable/Enable ODROID-VU7 Touchscreen
+setenv disable_vu7 "true"
 # Default Console Device Setting
@@ Line 224: / Line 240: @@
 ###########################################
 # Boot Arguments
 if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
 if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
+if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
-setenv bootargs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
+setenv bootargs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam} ${hid_quirks}"
 # Booting
@@ Line 286: / Line 304: @@
 (refer to E-EDID standard, Section 6.2)
-==== How to update U-Boot ====
+==== VU8C edid issue  ====
-It's a beta test version so you need to upate u-boot binary\\
+In some amount of VU8C monitors, the edid data has an unneeded resolution, 1152x768 except 1024x768,\\
-and modify boot.ini to activate the functionality.
+so when using display auto detection mode, some part of right side display image can be clipped.\\
-== 1. Download the script ==
-First, download the update script file as following \\
-and then change the mode.
-<code>
-$ su
-# wget http://dn.odroid.com/S905/BootLoader/ODROID-C2/display_autodetection/update_c2_boot.sh
-# chmod  +x  ./update_c2_boot.sh
-</code>
-<file sh update_c2_boot.sh>
-#!/bin/sh
-#
-# Copyright (C) 2017 Hardkernel Co,. Ltd
-# Joy Cho <joy.cho@hardkernel.com>
-#
-# SPDX-License-Identifier:      GPL-2.0+
-#
-# update c2 boot binaries on Ubunt
-#
-if [ -z $1 ]; then
-        echo "Usage :"
-        echo "    update : ./update_c2_boot.sh update"
-        echo "    check version : ./update_c2_boot.sh version"
-        exit 1
-fi
-uboot=/tmp/u-boot.bin
-tmp=/tmp/temp.bin
-case "$1" in
-"update")
-        # Download U-Boot binary
-        wget -P /tmp/ http://dn.odroid.com/S905/BootLoader/ODROID-C2/display_autodetection/u-boot.bin
-        if [ ! -f $uboot ];then
-                echo "error: uboot binary doesn't exist"
-                exit 1
-        fi
-        # Write
-        dd if=$uboot of=/dev/mmcblk0 bs=512 seek=97 status=none
-        echo "Update done!"
-        rm $uboot
-        ;;
-"version")
-        # check the U-Boot version
-        echo "Now let's check if update has been completed..."
-        dd if=/dev/mmcblk0 of=$tmp bs=512 skip=97 count=1334 status=none
-        grep -a -r -E -o ".{0,0}U-Boot 2015.01.{0,50}" /tmp/temp.bin | grep -a "("
-        rm $tmp
-        ;;
-*)
-        echo "Usage :"
-        echo "    update : ./update_c2_boot.sh update"
-        echo "    check version : ./update_c2_boot.sh version"
-        ;;
-esac
-</file>
-== 2. Update U-Boot ==
+If you have the issue, please set a display mode as "Manual mode" and "1024x768p60hz" as following,\\
+then you can see the normal display without the problem.
 <code>
-$ ./update_c2_boot.sh update
+# Display Auto Detection
-</code>
+# "false" or "true"
+setenv display_autodetect "false"
-== 3. Check the U-Boot version ==
+...
-<code>
+...
-$ ./update_c2_boot.sh version
+# setenv m "1080p60hz" # Progressive 60Hz
-</code>
+setenv m "1024x768p60hz"
-If the update is completed, you can see the following version.
-<code>
-# ./update_c2_boot.sh version
-Now let's check if update has been completed...
-U-Boot 2015.01-00183-g731ba4c-dirty (Feb 01 2017 - 12:08:29)
 </code>
-After updating, you must run **reboot** the system.
+Or if you want to update edid data of your VU8C converter board, please find the below link.\\
+We're preparing to release a new edid data binary by adjust the detailed timing table to fix ODROID-C2 display auto detection issue.\\
+Once we've done, the update status will be specified here.\\
+http://odroid.com/dokuwiki/doku.php?id=en:vu8_update_edid&s[]=vu8c