Differences

This shows you the differences between two versions of the page.

--- en:c1_tft_autoconsole [2015/03/16 17:12]
odroid
+++ en:c1_tft_autoconsole [2016/11/14 11:10] (current)
john1117 [Auto login]
@@ Line 1: / Line 1: @@
 ===== Auto console =====
-**Add to file "/etc/modules"**
+=== Add following lines in "/etc/modprobe.d/lcd32.conf" file. ===
-<code>
+  options fbtft_device name=odroidc_tft32 rotate=270 gpios=reset:116,dc:115 speed=32000000 cs=0
-spicc
+=== Add following lines in "/etc/modules" file. ===
-fbtft_device name=odroidc_tft32 rotate=270 gpios=reset:116,dc:115 speed=32000000 cs=0
+  spicc
-</code>
+  fbtft_device
-**Disable xorg on your ODROID-C1**\\
-There is two ways to disable.\\
-) Way to use the odroid-utility\\
+=== Add kernel argument to file "/media/boot/boot.ini" ===
-  sudo odroid-utility
+Find bootargs line and append following line to the end of line.
+  fbcon=map:22
+ex) setenv bootargs "root=UUID... fbcon=map:22"
+=== Automatically enable ===
+Add following line in "/etc/rc.local" file.
+  chvt 1
+=== Reboot ===
+  sudo reboot
-Use up / down cursor keys to select the "Xorg On/Off" menu option and hit. And then, select "Disable Xorg".
+===== Auto login [16.04] =====
+Edit tty1 service
+  sudo systemctl edit getty@tty1
+And add
+  [Service]
+  ExecStart=
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
-) Way to use native\\
+  odroid@odroid:~$ sudo systemctl cat getty@tty1 | grep Exec
-Write a word "manual" on /etc/init/lightdm.override
+  ExecStart=-/sbin/agetty --noclear %I $TERM
+  ExecStart=
-  sudo vi /etc/init/lightdm.override
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
+Restart tty1 service
-**Add kernel argument to file "/media/boot/boot.ini"**
+  sudo systemctl restart getty@tty1
-  fbcon=map:22
-**Reboot**
-  sudo reboot