Differences

This shows you the differences between two versions of the page.

--- 3.5inch_lcd_shield:autoconsole [2016/11/08 15:01]
john1117 [Disable xorg]
+++ 3.5inch_lcd_shield:autoconsole [2016/11/21 15:01] (current)
odroid [Automatically enable the Backlight]
@@ Line 1: / Line 1: @@
 ===== Auto console =====
+Start the system console on the LCD automatically after booting.
 ==== Add following lines in "/etc/modprobe.d/lcd35.conf" file. ====
   options fbtft_device name=flexpfb rotate=270
@@ Line 25: / Line 27: @@
 </WRAP>
 ==== Add kernel argument to file "/media/boot/boot.ini" ====
+Find bootargs line and append following line to the end of line.
   fbcon=map:22
+ex) setenv bootargs "root=UUID... fbcon=map:22"
 ==== Automatically enable the Backlight ====
 The PWM0 of **ODROID-C2/C1** is pull-down as default, so you have to add following line in "/etc/rc.local" file.
   echo 1 > /sys/devices/platform/pwm-ctrl/enable0
   echo 500000 > /sys/devices/platform/pwm-ctrl/freq0
-  echo 1023 | sudo tee /sys/devices/platform/pwm-ctrl/duty0
+  echo 1023 > /sys/devices/platform/pwm-ctrl/duty0
   chvt 1
 ==== Reboot ====
   sudo reboot
+==== Auto login ====
+Edit tty1 service
+  sudo systemctl edit getty@tty1
+And add
+  [Service]
+  ExecStart=
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
+  odroid@odroid:~$ sudo systemctl cat getty@tty1 | grep Exec
+  ExecStart=-/sbin/agetty --noclear %I $TERM
+  ExecStart=
+  ExecStart=-/sbin/agetty -a odroid --noclear %I $TERM
+Restart tty1 service
+  sudo systemctl restart getty@tty1