Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
en:xu4_hardware [2016/07/05 13:40] odroid [MicroSD Socket Handling Precautions] |
en:xu4_hardware [2017/07/03 17:59] john1117 [Expansion Connectors] |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardware and a smaller form factor. \\ | ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardware and a smaller form factor. \\ | ||
| - | Offering open source support, the board can run various flavors of Linux, including the latest Ubuntu 15.04 and Android 4.4 KitKat and 5.0 Lollipop.\\ | + | Offering open source support, the board can run various flavors of Linux, including the latest Ubuntu 16.04 and Android 4.4 KitKat and 7.1 Nougat.\\ |
| By implementing the eMMC 5.0, USB 3.0 and Gigabit Ethernet interfaces, the ODROID-XU4 boasts amazing data transfer speeds,\\ | By implementing the eMMC 5.0, USB 3.0 and Gigabit Ethernet interfaces, the ODROID-XU4 boasts amazing data transfer speeds,\\ | ||
| a feature that is increasingly required to support advanced processing power on ARM devices.\\ | a feature that is increasingly required to support advanced processing power on ARM devices.\\ | ||
| Line 23: | Line 23: | ||
| |Video Out|Standard Type A HDMI connector| | |Video Out|Standard Type A HDMI connector| | ||
| |Audio |Instead of On-board Audio codec, There is I2S Expansion Port(CON11) | | |Audio |Instead of On-board Audio codec, There is I2S Expansion Port(CON11) | | ||
| - | |USB3.0 Host|SuperSpeed USB standard A type connector x 2 port, Max Load: 900mA/port | | + | |USB3.0 Host|SuperSpeed USB standard A type connector x 2 port, Max Load: total 2Amp for two USB 3.0 host ports | |
| |USB2.0 Host|High Speed standard A type connector x 1 ports, Max Load: 500mA/port| | |USB2.0 Host|High Speed standard A type connector x 1 ports, Max Load: 500mA/port| | ||
| |Display|HDMI monitor| | |Display|HDMI monitor| | ||
| Line 33: | Line 33: | ||
| |HDD/SSD SATA interface (Optional)|SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5"/3.5" HDD and SSD storage| | |HDD/SSD SATA interface (Optional)|SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5"/3.5" HDD and SSD storage| | ||
| |Power (included)|5V 4A Power| | |Power (included)|5V 4A Power| | ||
| - | |Case(Option)|Mechanical case & cooler (98 x 74 x 29 mm approx. )| | + | |Case(Option)|Mechanical case & cooler (90 x 59 x 28 mm approx. )| |
| - | |PCB Size|94 x 70 x 18 mm approx.| | + | |PCB Size|83 x 58 x 20 mm approx.| |
| ====== Expansion Connectors ====== | ====== Expansion Connectors ====== | ||
| The XU3/XU4 povides one 30-pin dual row expansion header "**CON10**". \\ | The XU3/XU4 povides one 30-pin dual row expansion header "**CON10**". \\ | ||
| The location and pinout of these connectors is illustrated blew. All signals on expansion headers are 1.8V except PWRON signal. \\ | The location and pinout of these connectors is illustrated blew. All signals on expansion headers are 1.8V except PWRON signal. \\ | ||
| + | |||
| + | {{:en:xu4:xu4.png?300|}} | ||
| + | |||
| ---- | ---- | ||
| **CON10 - 2x15 pins** | **CON10 - 2x15 pins** | ||
| - | ^ Pin Number ^ Net Name ^ GPIO & Export No ^ Default Pin State ^ Pin Number ^ Net Name ^ GPIO & Export No ^ Default Pin State ^ | + | ^ Pin Number ^ Net Name ^ GPIO & Export No ^ Default Pin State ^ Pin Number ^ Net Name ^ GPIO & Export No ^ Default Pin State ^ |
| - | | 1 | 5V0 | | | 2 | GND | | | | + | | 1 | 5V0 | | | 2 | GND | | | |
| - | | 3 | ADC_0.AIN0 | XADC0AIN_0 | I | 4 | UART_0.RTSN | GPA0.2 (#173) | I(PUDN) | | + | | 3 | ADC_0.AIN0 | XADC0AIN_0 | I | 4 | UART_0.CTSN | GPA0.2 (#173) | I(PUDN) | |
| - | | 5 | UART_0.CTSN | GPA0.3 (#174) | I(PUDN) | 6 | UART_0.RXD | GPA0.0 (#171) | I(PUDN) | | + | | 5 | UART_0.RTSN | GPA0.3 (#174) | I(PUDN) | 6 | UART_0.RXD | GPA0.0 (#171) | I(PUDN) | |
| - | | 7 | SPI_1.MOISI | GPA2.7 (#192) | I(PUDN) | 8 | UART_0.TXD | GPA0.1 (#172) | I(PUDN) | | + | | 7 | SPI_1.MOISI | GPA2.7 (#192) | I(PUDN) | 8 | UART_0.TXD | GPA0.1 (#172) | I(PUDN) | |
| - | | 9 | SPI_1.MISO | GPA2.6 (#191) | I(PUDN) | 10 | SPI_1.CLK | GPA2.4 (#189) | I(PUDN) | | + | | 9 | SPI_1.MISO | GPA2.6 (#191) | I(PUDN) | 10 | SPI_1.CLK | GPA2.4 (#189) | I(PUDN) | |
| - | | 11 | SPI_1.CSN | GPA2.5 (#190) | I(PUDN) | 12 | PWRON | | I | | + | | 11 | SPI_1.CSN | GPA2.5 (#190) | I(PUDN) | 12 | PWRON | | I | |
| - | | 13 | XE.INT13 | GPX1.5 (#21) | I(PUDN) | 14 | I2C_1.SCL | GPB3.3 (#210) | I(PUDN) | | + | | 13 | XE.INT13 | GPX1.5 (#21) | I(PUDN) | 14 | I2C_1.SCL | GPB3.3 (#210) | I(PUDN) | |
| - | | 15 | XE.INT10 | GPX1.2 (#18) | I(PUDN) | 16 | I2C_1.SDA | GPB3.2 (#209) | I(PUDN) | | + | | 15 | XE.INT10 | GPX1.2 (#18) | I(PUDN) | 16 | I2C_1.SDA | GPB3.2 (#209) | I(PUDN) | |
| - | | 17 | XE.INT14 | GPX1.6 (#22) | I(PUDN) | 18 | XE.INT11 | GPX1.3 (#19) | I(PUDN) | | + | | 17 | XE.INT14 | GPX1.6 (#22) | I(PUDN) | 18 | XE.INT11 | GPX1.3 (#19) | I(PUDN) | |
| - | | 19 | XE.INT22 | GPX2.6 (#30) | I(PUDN) | 20 | XE.INT20 | GPX2.4 (#28) | I(PUDN) | | + | | 19 | XE.INT22 | GPX2.6 (#30) | I(PUDN) | 20 | XE.INT20 | GPX2.4 (#28) | I(PUDN) | |
| - | | 21 | XE.INT21 | GPX2.5 (#29) | I(PUDN) | 22 | XE.INT23 | GPX2.7 (#31) | I(PUDN) | | + | | 21 | XE.INT21 | GPX2.5 (#29) | I(PUDN) | 22 | XE.INT23 | GPX2.7 (#31) | I(PUDN) | |
| - | | 23 | ADC_0.AIN3 | XADC0AIN_3 | I | 24 | XE.INT17 | GPX2.1 (#25) | I(PUDN) | | + | | 23 | ADC_0.AIN3 | XADC0AIN_3 | I | 24 | XE.INT17 | GPX2.1 (#25) | I(PUDN) | |
| - | | 25 | XE.INT15 | GPX1.7 (Soft I2C SCL) (#23) | I(PUDN) | 26 | XE.INT16 | GPX2.0 (#24) | I(PUDN) | | + | | 25 | XE.INT15 | GPX1.7 (#23) | I(PUDN) | 26 | XE.INT16 | GPX2.0 (#24) | I(PUDN) | |
| - | | 27 | XE.INT25 | GPX3.1 (Soft I2C SDA) (#33) | I(PUDN) | 28 | GND | | | | + | | 27 | XE.INT25 | GPX3.1 (#33) | I(PUDN) | 28 | GND | | | |
| - | | 29 | VDD_IO(1.8V) | | | 30 | GND | | | | + | | 29 | VDD_IO(1.8V) | | | 30 | GND | | | |
| ---- | ---- | ||
| + | |||
| + | {{:en:xu4:xu4_con10.png?600|}} | ||
| **CON11 - 2x6 pins** | **CON11 - 2x6 pins** | ||
| Line 71: | Line 76: | ||
| | 11 | I2S_0.LRCK | GPZ.2 (#227) | I(PUDN) | 12 | I2S_0.SDI | GPZ.3 (#228) | I(PUDN) | | | 11 | I2S_0.LRCK | GPZ.2 (#227) | I(PUDN) | 12 | I2S_0.SDI | GPZ.3 (#228) | I(PUDN) | | ||
| + | {{:en:xu4:xu4_con11.png?600|}} | ||
| **[[http://dn.odroid.com/5422/ODROID-XU3/Schematics/XU4_HIGHTOPSILK.png|PCB Layout for pin map]]** | **[[http://dn.odroid.com/5422/ODROID-XU3/Schematics/XU4_HIGHTOPSILK.png|PCB Layout for pin map]]** | ||
| Line 95: | Line 101: | ||
| \___________| | \___________| | ||
| - | 1.8V LVTTL</code> | + | 1.8V LVTTL interface |
| + | Pin 1 : 1.8Volt output from XU4 board for the reference voltage for USB-UART board. | ||
| + | </code> | ||
| Line 105: | Line 113: | ||
| You need to remove the HDMI cable or wait enough time of full discharging.\\ | You need to remove the HDMI cable or wait enough time of full discharging.\\ | ||
| + | |||
| + | ====== USB VBUS control issue ====== | ||
| + | |||
| + | There is no way to control the USB host power(VBUS) with software due to a missing control register.\\ | ||
| + | |||
| + | |||
| + | ====== Caution : Over-Voltage Protection feature ======= | ||
| + | |||
| + | <WRAP round important 80%> | ||
| + | ** Caution : Over-Voltage Protection feature ** \\ | ||
| + | 1. The power source must be connected to the DC-Jack. \\ | ||
| + | 2. Maximum over-voltage must be lower than 16Volt.\\ | ||
| + | </WRAP> | ||
| ====== Compliance Archives ====== | ====== Compliance Archives ====== | ||
| *{{:en:xu4:en:kcc_odroid-xu4.pdf|ODROID-XU4 KCC Certification}} | *{{:en:xu4:en:kcc_odroid-xu4.pdf|ODROID-XU4 KCC Certification}} | ||
| Line 123: | Line 144: | ||
| {{:en:xu4:microsdsocket_handlingprecautions1.png?640}} | {{:en:xu4:microsdsocket_handlingprecautions1.png?640}} | ||
| - | 3. To make a minimal volume of the connector, the card detection parts are exposed partially. So any excessive plugging force can break it like red dotted ellipse part. | + | 3. To make a minimal volume of the connector, the card detection parts are exposed partially. So any excessive plugging force can break it like red ellipse part. |
| {{:en:xu4:microsdsocket_handlingprecautions2.png?160}} | {{:en:xu4:microsdsocket_handlingprecautions2.png?160}} | ||
| - | 4. Micro SD/ TransFlash 카드용 커넥터 입니다. 이러한 카드 이외의 것은 삽입하지 마십시오. 또, 카드의 역삽입 및 기울기, 뒤틀림 삽입은 하지 마십시오. 카드역삽입 방지 기구를 가지고 있지만, 카드역방향 및 뒤틀림 방향등 비정상적으로 무리하게 삽입하면 카드 및 커넥터 파손의 원인이 되는 일이 있습니다. | ||
| - | |||
| - | 5. 카드 삽입 상태에서 카드를 빼는 방향 이외의 방향으로 무리한 힘을 주지 마십시오.\\ 카드 및 커넥터 파손의 원인이 되는 일이 있습니다. | ||
| - | |||
| - | 6. 카드의 재질상, 카드 삽발거에 의하여 표면이 긁힘이나 자국이 발생합니다만 품질, 제품 성능상의 문제는 없습니다. 카드의 굴곡강도의 규격은 10N입니다.\\ 카드에 과다한 하중을 가하면 카드파손의 원인이 되기 때문에,주의 바랍니다. | ||
| - | |||
