Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision Last revision Both sides next revision | ||
en:xu4_cloudshell2:easy_install [2017/04/20 14:41] john1117 created |
en:xu4_cloudshell2:easy_install [2017/04/20 17:14] john1117 |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | lcd configuration | + | === 1. Set the RAID mode === |
+ | {{:en:raid_select.png?600|}} | ||
+ | There are four data storage modes on the CloudShell2: **//RAID 0, RAID 1, SPAN//** and **//PM//**. This means that the hard disks will be detected separately in PM mode.\\ | ||
+ | To select the RAID mode, set the RAID Mode DIP Switch to the setting that you want, then apply power while pressing the RAID Setup Key button until booting is complete. | ||
+ | |||
+ | === 2. Configure LCD and Fan === | ||
+ | **Enter the following commands to enable the LCD and fan.** | ||
+ | |||
+ | Enabling/Configure the LCD | ||
wget https://github.com/john1117/odroid-cloudshell/raw/master/odroid-cloudshell_20170420-4_armhf.deb | wget https://github.com/john1117/odroid-cloudshell/raw/master/odroid-cloudshell_20170420-4_armhf.deb | ||
sudo dpkg -i odroid-cloudshell_20170420-4_armhf.deb | sudo dpkg -i odroid-cloudshell_20170420-4_armhf.deb | ||
- | fan configuration | + | Fan configuration |
wget https://github.com/john1117/cloudshell2-fan/raw/master/cloudshell2-fan_20170420-1_armhf.deb | wget https://github.com/john1117/cloudshell2-fan/raw/master/cloudshell2-fan_20170420-1_armhf.deb | ||
sudo dpkg -i cloudshell2-fan_20170420-1_armhf.deb | sudo dpkg -i cloudshell2-fan_20170420-1_armhf.deb |