Differences

This shows you the differences between two versions of the page.

--- en:xu3_android_release_note_v5.0 [2017/06/22 09:56]
codewalker [New updates]
+++ en:xu3_android_release_note_v5.0 [2017/07/17 09:23]
codewalker [800 X 480P(ODROID-Vu7/Vu5) No-EDID No-HPD]
@@ Line 11: / Line 11: @@
   * Support new resolutions. [[:supported_resolutions|Supported resolutions]]
      - 848x480p60hz
-     - 1024x600p60hz
+     - 1024x600p60hz <color #00a2e8>**Changed from 43hz**</color>
      - 1280x768p60hz
      - 1152x864p75hz
@@ Line 19: / Line 19: @@
   * Fixed GPS Module ttyACM[USB] device number problem.[[https://forum.odroid.com/viewtopic.php?f=137&t=27226&p=192249#p192249]]
-=== Check your Firmware/kernel version to confirm whether the update was done correctly or not ===
+===== Check your Firmware/kernel version to confirm whether the update was done correctly or not =====
 <code>
 shell@odroidxu3:/ $ getprop ro.build.version.incremental
@@ Line 153: / Line 153: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
@@ Line 271: / Line 271: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
-boot
 </file>
@@ Line 383: / Line 382: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
@@ Line 501: / Line 500: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>
@@ Line 594: / Line 593: @@
 setenv bootcmd      "movi read kernel 0 40008000;bootz 40008000"
-setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink}"
+setenv bootargs     "fb_x_res=${fb_x_res} fb_y_res=${fb_y_res} hdmi_phy_res=${hdmi_phy_res} edid=${edid} hpd=${hpd} led_blink=${led_blink} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y}"
 boot
 </file>