Differences

This shows you the differences between two versions of the page.

--- en:odroid-ups2 [2016/03/21 16:17]
ruppi [ODROID-C1]
+++ en:odroid-ups2 [2016/03/22 17:46]
joy.cho [ODROID-C1/C2]
@@ Line 97: / Line 97: @@
 |　C1|{{:en:ups2:odroid-c1_a_type_ups2-6_1..jpg?300|}}||UPS2|{{:en:ups2:odroid-c1_a_type_ups2-6_2.jpg?300|}}|
-Due to hardware limitations, in order to use the C2 UPS2 subtract the green line of the 3-pin socket,
-and connect the 3-pin socket as shown in the figure above the 40 pin Header.
+Due to hardware limitations, in order to use the UPS2 on ODROID-C2\\
-The extracted lines as shown below, connect the pin #26 of the 40 pin header.
+  - Extract the blue cable of the 3-pin socket,\\
+  - Connect the 3-pin socket as shown in the figure above the 40 pin Header.\\
+The extracted lines connect the pin #26 of the 40 pin header as shown below.\\
+{{:en:connection_ups2_for_odroidc2.png?400|}}
-===== ODROID-C2 =====
-  - Detailed connection picture between JP1 of UPS2 and the 40pin header(**J2**) of ODROID-C2.
 ====== ODROID safe shutdown in the event of a power outage =====
@@ Line 123: / Line 124: @@
 The BAT_OK and AC_OK signals are used in the below simple shell script which runs in the background via crontab.
+<WRAP left round important 70%>
+Before using UPS2 on ODROID-C2, please check u-boot version. \\
+If the version of yours is the one before Mar 18 2016, update boot loader as following. \\
+On Ubuntu release version "ver1.2" or higher, the control routine for ups2 port will be applied.
+Click the following site to download boot loader
+  * [[http://dn.odroid.com/S905/BootLoader/ODROID-C2/c2_bootloader.tar.gz|Download]]
+<code>
+$ tar zxvf c2_bootloader.tar.gz
+$ cd c2_bootloader
+$ ./sd_fusing.sh <device/path/of/your/card>
+</code>
+</WRAP>
 ==== Auto shutdown Script ====