Differences

This shows you the differences between two versions of the page.

--- en:c2_android_release_note_v1.7 [2016/06/14 15:22]
codewalker created
+++ en:c2_android_release_note_v1.7 [2016/06/14 16:08]
odroid [New updates]
@@ Line 9: / Line 9: @@
 File name : selfinstall-odroidc2-eng-s905_5.1.1_master-240-v1.7.img
 ===== New updates =====
-  * Changed default resolution by 1080P.
+  * Changed default resolution to 1080P from 720p.
-  * Fixed ODROID-VU7+ touch screen problem.[[http://forum.odroid.com/viewtopic.php?f=137&t=20959|Vu7+ Touch Screen Issue]]
+  * Fixed ODROID-VU7+ touch screen and USB enumeration problem.[[http://forum.odroid.com/viewtopic.php?f=137&t=20959|Vu7+ Touch Screen Issue]]
-  * Supported format file system of media mounted.
+  * Supported various file system format on the mounted media.
-  * [ boot-logo for VU7+/VU7 ]
+  * To support 1920x1200 monitors whose maximum pixel clock is too low, HDMI PHY has been updated to reduce blanking issue but, some of hpll setting should be adjusted more.
-  * Copy the new boot-logo.bmp (or boot-logo.bmp.gz) with 1024x600, 24bpp (VU7+) / 800x480, 24bpp (VU7) to VFAT partition
+  * U-boot supports the boot-logo on various HDMI resolutions ie., VU7+/VU7 [[en:c2_tips|Tips for ODROID-C2]]
-  * Modify and add the following value in boot.ini
+     * add "usb pwren" in boot.ini
-  - Adjust hdmimode setenv hdmimode "1024x600p60hz" (or "800x480p60hz")
-  - Adjust vout_mode setenv vout_mode "dvi"
-  - Add a command, usb pwren after showlogo command showlogo ${hdmimode} usb pwren JC
-  * To support 1920x1200 monitors whose maximum pixel clock is too low, HDMI PHY has been updated to reduce blanking issue but, some of hpll setting should be adjusted more.
 ==== Notes for KODI on 4K/UHD display ====
 [[http://codewalkerster.blogspot.kr/2016/02/how-to-install-kodi-v170krypton-for-4k.html]]
@@ Line 155: / Line 152: @@
 showlogo ${hdmimode}
+#usb pwren
 movi read dtb 0 ${dtbaddr}