Differences

This shows you the differences between two versions of the page.

--- en:xu4_cloudshell_lcd_config [2015/09/16 16:57]
brian.kim
+++ en:xu4_cloudshell_lcd_config [2017/03/17 10:13]
brian.kim
@@ Line 8: / Line 8: @@
-**Before attempting this guide, please make sure you are running the latest kernel. **
+** Tested on Ubuntu 16.04 Minimal **
-You can update your kernel using ODROID Utility.
@@ Line 18: / Line 17: @@
 echo "options fbtft_device name=hktft9340 busnum=1 rotate=270" > /etc/modprobe.d/odroid-cloudshell.conf
 echo "spi_s3c64xx" >> /etc/modules
+echo "spidev" >> /etc/modules
 echo "fbtft_device" >> /etc/modules
 </code>
+=== Edit /etc/modprobe.d/blacklist-odroid.conf ===
+Remove the blacklist on spi.
+<code>
+# Comment the required lines
+# IO Board
+blacklist ioboard_bh1780
+blacklist ioboard_bmp180
+blacklist ioboard_keyled
+# SPI
+# blacklist spidev
+# blacklist spi_s3c64xx
+# 3.2" LCD Touchscreen driver
+blacklist ads7846
+</code>
 The commands above will ensure that at every boot the LCD is configured.