We're no longer updating This wiki!!

Block Diagram and Schematic

ODROID-XU3 is a new generation of computing device with more powerful, more energy-efficient hardware and smaller form factor.
Offering open source support, the board can run various flavours of Linux, including the latest Ubuntu 14.04 and the Android 4.4.
By adopting e-MMC 5.0 and USB 3.0 interface, the ODROID-XU3 boasts fast data transfer speed, a feature that is increasingly required to support advanced processing power on ARM devices that allows users can fully experience an upgrade in computing such as faster booting, web browsing and 3D game experience.

Schematics and drawings are available here.

http://www.hardkernel.com/main/products/prdt_info.php?g_code=G140448267127&tab_idx=2

Specifications

ProcessorSamsung Exynos5 Octa ARM Cortex™-A15 Quad 2Ghz and Cortex™-A7 Quad 1.3GHz CPUs
Memory 2Gbyte LPDDR3 RAM at 933MHz (14.9GB/s memory bandwidth) PoP stacked
3D AcceleratorMali-T628 MP6(OpenGL ES 3.0/2.0/1.1 and OpenCL 1.1 Full profile)
Videosupports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Outmicro HDMI connector
Audio On-board Audio codec, Standard 3.5mm headphone jack, HDMI Digital
USB3.0 HostSuperSpeed USB standard A type connector x 1 port
USB3.0 OTGSuperSpeed USB Micro A-B type connector x 1 port
USB2.0 HostHigh Speed standard A type connector x 4 ports
DisplayHDMI monitor
Storage (Option)MicroSD Card Slot, eMMC module socket : eMMC 5.0 HS4000 Flash Storage
Fast Ethernet LAN 10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
Gigabit Ethernet LAN(Option)USB3.0 to Gigabit Ethernet adapter (USB module)
WiFi (Option)USB IEEE 802.11b/g/n 1T1R WLAN with Antenna (USB module)
HDD/SSD SATA interface (Optional)SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5“/3.5” HDD and SSD storage
Power (included)5V 4A Power
Case(included)Mechanical case & cooler (98 x 74 x 29 mm approx. )
PCB Size94 x 70 x 18 mm approx.

Expansion Connectors

The Odroid-xu3 povides one 30-pin dual row expansion header “CON10”. The location and pinout of these connectors is illustrated blew. All signals on expansion headers are 1.8V except PWRON signal.


CON10 - 2×15 pins

Pin Number Net Name GPIO & Export No Default Pin State Pin Number Net Name GPIO & Export No Default Pin State
1 5V0 2 GND
3 ADC_0.AIN0 XADC0AIN_0 I 4 UART_0.RTSN GPA0.2 (#173) I(PUDN)
5 UART_0.CTSN GPA0.3 (#174) I(PUDN) 6 UART_0.RXD GPA0.0 (#171) I(PUDN)
7 SPI_1.MOSI GPA2.7 (#192) I(PUDN) 8 UART_0.TXD GPA0.1 (#172) I(PUDN)
9 SPI_1.MISO GPA2.6 (#191) I(PUDN) 10 SPI_1.CLK GPA2.4 (#189) I(PUDN)
11 SPI_1.CSN GPA2.5 (#190) I(PUDN) 12 PWRON I
13 XE.INT13 GPX1.5 (#21) I(PUDN) 14 I2C_1.SCL GPB3.3 (#210) I(PUDN)
15 XE.INT10 GPX1.2 (#18) I(PUDN) 16 I2_C1.SDA GPB3.2 (#209) I(PUDN)
17 XE.INT14 GPX1.6 (#22) I(PUDN) 18 XE.INT11 GPX1.3 (#19) I(PUDN)
19 XE.INT22 GPX2.6 (#30) I(PUDN) 20 XE.INT20 GPX2.4 (#28) I(PUDN)
21 XE.INT21 GPX2.5 (#29) I(PUDN) 22 XE.INT23 GPX2.7 (#31) I(PUDN)
23 ADC_0.AIN3 XADC0AIN_3 I 24 XE.INT17 GPX2.1 (#25) I(PUDN)
25 XE.INT15 GPX1.7 (Soft I2C) I(PUDN) 26 XE.INT16 GPX2.0 (#24) I(PUDN)
27 XE.INT25 GPX3.1 (Soft I2C) I(PUDN) 28 GND
29 VDD_IO(1.8V) 30 GND

LED Indicators

RED LED(LED2)- Power

  • ON when it is Hooked up to 5V power.
  • OFF when it is not Hooked up to 5V power.

3 colors LED(LED1)

On bootloader

  • Green is solid on when bootloader is working

On Kernel

  • Blue is blinking when Kernel is running(heart beat).
  • Green is blinking when the eMMC is being accessed.
  • Red is blinking when the MicroSD is being accessed.

UART Console Connector

_____UART____
|Pin 4 - GND|
|Pin 3 - RXD|
|Pin 2 - TXD|
|Pin 1 - VCC|
\___________|

1.8V LVTTL
en/xu3_hardware.txt · Last modified: 2017/04/25 14:56 by luke.go
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0