Differences

This shows you the differences between two versions of the page.

--- en:weatherboard_setting [2015/04/06 10:47]
john1117 [Compile and Upload]
+++ en:weatherboard_setting [2015/04/06 10:48] (current)
john1117 [Compile and Upload]
@@ Line 1: / Line 1: @@
+====== Setting up the Weather-Board ======
+First download the ODROID-SHOW source code with github.\\
+Then add libraries after install the arduino IDE.\\
+Finally after **connecting jumper**, compile and upload.
+==== Download the ODROID-SHOW source code ====
+=== Ubuntu ===
+<code bash>
+#sudo apt-get install git
+#cd ~/work
+#git clone https://github.com/hardkernel/ODROID-SHOW
+</code>
+=== Windows ===
+{{https://github.com/hardkernel/ODROID-SHOW/archive/master.zip|ODROID-SHOW.zip}}
+==== Install the arduino IDE ====
+=== Ubuntu ===
+Launch Ubuntu Software Center, search for "arduino", and install it
+{{:en:software_center.png?500|}}
+=== Windows ===
+{{http://arduino.googlecode.com/files/arduino-1.0.5-r2-windows.zip|ArduinoIDE.zip}}
+==== Run arduino IDE ====
+Open "weather_board.ino" sketch file in this path.\\
+ODROID-SHOW/weather_board/weather_board.ino
+==== Setting Preferences ====
+You MUST locate sketchbook path to ODROID-SHOW directory.
+{{:en:preferences.png?500|}}
+==== Add Libraries ====
+You need to add the ODROID-SHOW libraries in the IDE through the menu skech -> import Library... -> Add Library...
+{{:en:add_library.png?500|}}
+The following way, add ODROID-SHOW folder. (sketchbook folder)
+{{:en:add_library2.png?500|}}
+==== Compile and Upload ====
+Check the serial port between /dev/ttyUSBn and "tools -> Serial Port" of arduino IDE.
+  ls /dev/ttyUSB*
+{{:en:check_serialport.png?500|}}
+Finally **after connecting jumper**, click "upload" button of arduino IDE.
+==== Output screen ====
+{{ :en:weatherboard_setup.jpg?500 |}}