Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Introduction ======
+{{ :en:weatherboard_main.jpg?200|}}
+The Weather board is an easy to use ODROID-SHOW Add-on that grants you access to UV Index, barometric pressure, altitude, relative humidity, illumination and temperature. Its dimension is only 20 x 20 mm. These Weather board utilize the Si7020 humidity, BMP180 barometric pressure, and Si1132 Ultraviolet(UV) Index with ambient light sensors and relies on some sensor oriented Arduino libraries. Each board comes with a 6-pin connector for ODROID-SHOW connection. All the sensor data goes though I2C communication between sensor ICs and ATMEGA328P MCU on the ODROID-SHOW.
+{{:en:weatherboard_data.jpg?300 |}}
+With a few batteries, you can make a portable outdoor weather data capture system. You can also connect it to your host PC or ODROID via ODROID-SHOW to log the various environmental data like a weather station.
+[[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G140264897696 | Where to buy]]
+====== Hardware =======
+=== Specifications ===
+|Interface|I2C|
+|Input Voltage|3.0V~3.5V|
+|current Consumption with ODROID-SHOW| 60 mA|
+  * {{:en:weather_board_schematic_140507.pdf|WEATHER-BOARD Schematic}}
+  * [[http://ae-bst.resource.bosch.com/media/products/dokumente/bmp180/BST-BMP180-DS000-12.pdf|BMP180 Datasheet]]
+  * [[http://www.silabs.com/Support%20Documents/TechnicalDocs/Si1132.pdf|Si1132 Datasheet]]
+  * [[https://www.silabs.com/Support%20Documents/TechnicalDocs/Si7020-A20.pdf|Si7020 Datasheet]]
+====== Firmware ======
+=== Version history ===
+^Firmware^^^PC Application^^^
+|Version|Release date|Features|Version|Release date|Features|
+|1.0|Jun 22, 2014|First update WEATHER-BOARD firmware|1.0|Jun 22, 2014|First update WEATHER-BOARD PC Application|
+|1.1|Jul 30, 2014|update bmp180 library.|:::|:::|:::|
+|1.2|Sep 03, 2014|update si1132 library with calibration of IR photodiode.|:::|:::|:::|
+|1.3|Dec 19, 2014|update functions checking battery and inputing switches for ODROID-SHOW2|:::|:::|:::|
+[[https://github.com/hardkernel/ODROID-SHOW]]
+====== Tutorials ======
+  * [[WeatherBoard_setting | Setting up the Weather-Board with ODROID-SHOW on ubuntu]]
+  * [[WeatherBoard_App | Using a PC Application on ubuntu]]
+  * [[en:c1_wb_16x2lcd | Using a Weather-Board with 16x2 LCD IO Shield on C1 ubuntu]]