Differences

This shows you the differences between two versions of the page.

--- en:wb_c_16x2lcd [2015/11/02 12:38]
john1117 created
+++ en:wb_c_16x2lcd [2017/07/06 15:30] (current)
john1117 [WEATHER-BOARD with 16x2 LCD on ODROID-C]
@@ Line 1: / Line 1: @@
-====== WEATHER-BOARD with 16x2 LCD on ODROID-C ======
+====== WEATHER-BOARD with 16x2 LCD on ODROID-C1/C1+/C2 ======
 [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141637550797|{{:en:weather_board:wb_16x2.png?400|}}]]
-====== I2C settings ======
+**I2CA (/dev/i2c-1)**
+^Pin Number^Net Name^Export Number^^
+^:::^:::^C0/C1/C1+^C2^
+|3|I2CA.SDA|74|205|
+|5|I2CA.SCL|75|206|
+**I2CB (/dev/i2c-2)**
+^Pin Number^Net Name^Export Number^^
+^:::^:::^C0/C1/C1+^C2^
+|27|I2CB.SDA|76|207|
+|28|I2CB.SCL|77|208|
+====== Settings I2C ======
 Add I2C module
   sudo modprobe aml_i2c
   ls /dev/i2c-*
-<code bash>
-/dev/i2c-1  /dev/i2c-2  /dev/i2c-3  /dev/i2c-4
-</code>
 To always load the kernel module on boot up, run the following command.
   echo "aml_i2c" | sudo tee -a /etc/modules
 ====== Download & Run ======
   git clone https://github.com/hardkernel/WEATHER-BOARD.git
@@ Line 16: / Line 27: @@
   make
 Check your I2C node, and run the program.
-  sudo ./wether_board
+  sudo ./weather_board
 or
   sudo ./weather_board /dev/i2c-2
+{{:en:weather_board:print_wb.png?500|}}