This is an old revision of the document!
Table of Contents
WEATHER-BOARD with 16x2 LCD on ODROID-C
I2C settings
Add I2C module
sudo modprobe aml_i2c ls /dev/i2c-*
/dev/i2c-1 /dev/i2c-2 /dev/i2c-3 /dev/i2c-4
To always load the kernel module on boot up, run the following command.
echo "aml_i2c" | sudo tee -a /etc/modules
Download & Run
git clone https://github.com/hardkernel/WEATHER-BOARD.git cd WEATHER-BOARD/c_weather make
Check your I2C node, and run the program.
sudo ./wether_board
or
sudo ./weather_board /dev/i2c-2