Differences

This shows you the differences between two versions of the page.

--- en:vu_backlight_with_android [2017/06/09 15:37]
codewalker created
+++ en:vu_backlight_with_android [2017/06/11 17:11]
codewalker [PWM]
@@ Line 11: / Line 11: @@
 ==== PWM ====
+=== ODROID-C1/C1+/C0 ===
+^ Pin Number  ^ Expansion Net Name  ^ Description                               ^
+| 33          | GPIOX.BIT11         | Export GPIO#108, Wiring Pi GPIO#23, PWM0  |
+| 35          | GPIOX.BIT0         | Export GPIO#97, Wiring Pi GPIO#24  |
+=== ODROID-C2 ===
+^ Pin Number  ^ Expansion Net Name  ^ Description                               ^
+| 33          | GPIOX.BIT6         | Export GPIO#234, Wiring Pi GPIO#23, PWM0  |
+| 35          | GPIOY.BIT3         | Export GPIO#214, Wiring Pi GPIO#24  |
+=== ODROID-VU5/7/7+ ===
 {{:en:img_20170607_180950.jpg?nolink&600|}}
+=== ODROID-VU8C ===
+{{:en:201611251001188757.jpg?600|}}
 ===== SW =====
-==== ODROID-C1/C1+/C0 ====
+<WRAP left round tip 80%>
+* **C1/C1+/C0** : Android KitKat (4.4.4) v3.7 or higher version is available.\\
+* **C2** : Android Marshmallow (6.0.1) v3.0 or higher version is available.
+</WRAP>
-android KitKat(4.4.4) v3.7
-Edit boot.ini
+==== ODROID-VU5/VU7 ====
+<file>
+setenv hdmimode "800x480p60hz"
+setenv vout_mode "dvi"
+setenv backlight_pwm "yes"
+</file>
+==== ODROID-VU7+ ====
 <file>
-setenv hdmimode "1024x768p60hz"
+setenv hdmimode "1024X600p60hz"
 setenv vout_mode "dvi"
-# Enable backlight_pwm
-# disable : backlight "no"
-# ODROID-VU5/7 : backlight "yes"
-# ODROID-VU8 : backlight "invert"
 setenv backlight_pwm "yes"
 </file>
-==== ODROID-C2 ====
+==== ODROID-VU8 ====
-android Marshmallow(6.0.1) v3.0
-Edit boot.ini
 <file>
-setenv hdmimode "1024x768p60hz"
+setenv hdmimode "1024X768p60hz"
 setenv vout_mode "dvi"
-# Enable backlight_pwm
-# disable : backlight "no"
-# ODROID-VU5/7 : backlight "yes"
-# ODROID-VU8 : backlight "invert"
 setenv backlight_pwm "invert"
 </file>