We're no longer updating This wiki!!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:howto_install_heatsink_xu4 [2016/06/22 16:19]
pinkodroid [Step1: Remove the stock fan cooler]
en:howto_install_heatsink_xu4 [2016/06/23 08:49] (current)
pinkodroid [Step2: Clean the CPU and Heatsink surfaces]
Line 16: Line 16:
  
 ===== Step1: Remove the stock fan cooler ===== ===== Step1: Remove the stock fan cooler =====
-Use a long-nose plier or tweezer.+Use a long-nose plier or tweezer.
 One way to remove the heatsink is to use a retractable ballpoint pen. Remove the ink portion of the pen and then use the hole on the writing end of the pen to push the retaining clips through the holes on the XU4. Once they snap through, carefully rotate them from the other side while pulling on them, and they should come free.\\ One way to remove the heatsink is to use a retractable ballpoint pen. Remove the ink portion of the pen and then use the hole on the writing end of the pen to push the retaining clips through the holes on the XU4. Once they snap through, carefully rotate them from the other side while pulling on them, and they should come free.\\
 Next, disconnect the power from the fan. Lastly, slowly pull the heatsink and fan away from the XU4. It will take some force as the thermal interface is adhesive. We normally rock the heatsink back and forth while pulling on it. Next, disconnect the power from the fan. Lastly, slowly pull the heatsink and fan away from the XU4. It will take some force as the thermal interface is adhesive. We normally rock the heatsink back and forth while pulling on it.
Line 37: Line 37:
  
 Remove the old thermal paste on the CPU / PCB (if exists) and the surface of the heatsink carefully.\\ Remove the old thermal paste on the CPU / PCB (if exists) and the surface of the heatsink carefully.\\
-Thermal paste is responsible for conducting heat from the processor to the heat sink. Reassembling without applying thermal paste will cause the processor to overheat, resulting in permanent damage.+Thermal paste is responsible for conducting heat from the processor to the heat sink. Reassembling without applying thermal paste will cause the processor to overheat.
 Apply the alcohol on a lint-free towels and use it to clean the the surface of CPU and the blue heatsink. ​ Apply the alcohol on a lint-free towels and use it to clean the the surface of CPU and the blue heatsink. ​
  
Line 45: Line 45:
 ===== Step3: Apply thermal paste on the CPU surface ===== ===== Step3: Apply thermal paste on the CPU surface =====
  
-Apply a small amount of thermal paste on the CPU surface and spread ​the paste evenly across the surface. ​+Apply a small amount of thermal paste onto the CPU surface and smear the paste evenly across the surface. ​
  
 Make sure to cover the entire surface that will mate to the cooler.\\ Make sure to cover the entire surface that will mate to the cooler.\\
  
-Do not apply the thermal paste on the heatsink.+Do not need to apply the thermal paste on the heatsink.
  
 {{:​en:​xu4:​10-xu4_heat_sink_replacement.jpg?​300|}} {{:​en:​xu4:​10-xu4_heat_sink_replacement.jpg?​300|}}
en/howto_install_heatsink_xu4.1466581771.txt.gz ยท Last modified: 2016/06/22 16:19 by pinkodroid
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0