Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Last revision Both sides next revision | ||
en:howto_install_heatsink_xu4 [2016/06/22 17:03] pinkodroid [Step3: Apply thermal paste on the CPU surface] |
en:howto_install_heatsink_xu4 [2016/06/22 17:04] pinkodroid [Step1: Remove the stock fan cooler] |
||
---|---|---|---|
Line 16: | Line 16: | ||
===== Step1: Remove the stock fan cooler ===== | ===== Step1: Remove the stock fan cooler ===== | ||
- | Use a long-nose plier or tweezer. | + | Use a long-nose plier or a tweezer. |
One way to remove the heatsink is to use a retractable ballpoint pen. Remove the ink portion of the pen and then use the hole on the writing end of the pen to push the retaining clips through the holes on the XU4. Once they snap through, carefully rotate them from the other side while pulling on them, and they should come free.\\ | One way to remove the heatsink is to use a retractable ballpoint pen. Remove the ink portion of the pen and then use the hole on the writing end of the pen to push the retaining clips through the holes on the XU4. Once they snap through, carefully rotate them from the other side while pulling on them, and they should come free.\\ | ||
Next, disconnect the power from the fan. Lastly, slowly pull the heatsink and fan away from the XU4. It will take some force as the thermal interface is adhesive. We normally rock the heatsink back and forth while pulling on it. | Next, disconnect the power from the fan. Lastly, slowly pull the heatsink and fan away from the XU4. It will take some force as the thermal interface is adhesive. We normally rock the heatsink back and forth while pulling on it. |