We're no longer updating This wiki!!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:c2_bootlogo [2016/11/01 18:08]
joy.cho [How to replace boot logo with your custom image]
en:c2_bootlogo [2017/05/15 08:40] (current)
odroid [How to replace boot logo with your custom image]
Line 78: Line 78:
  
 <WRAP center round important>​ <WRAP center round important>​
-If you will use bmp data on logo partition, make sure there is NO boot-logo.bmp.gz file on your VFAT area, because U-Boot checks very first if there is boot-logo.bmp.gz on VFAT area and then check logo partition.+If you will use bmp data on logo partition, make sure there is NO boot-logo.bmp.gz file on your VFAT area, because U-Boot checks very first if there is boot-logo.bmp.gz on VFAT area and then check logo partition.\\ 
 + 
 +You need this special cable to access the U-boot command.\\ 
 +[[http://​www.hardkernel.com/​main/​products/​prdt_info.php?​g_code=G134111883934]] 
 + 
 +You also need a normal micro-USB cable for the fastboot/​adb interface between C2 and your host PC too.\\ 
 +[[http://​www.hardkernel.com/​main/​products/​prdt_info.php?​g_code=G134114594259]] 
 </​WRAP>​ </​WRAP>​
  
en/c2_bootlogo.txt · Last modified: 2017/05/15 08:40 by odroid
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0