en:c2_android_release_note_marshmallow_v3.1 [ODROID Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Release Note of Android Marshmallow (v3.1) =====
----
===== Summary =====
| Release Date | Jun/27/2017 KST |
| Release Type | Regular release |
| Release Files| [[http://dn.odroid.com/S905/Android/ODROID-C2/selfinstall-odroidc2-eng-s905_6.0.1_master-65-v3.1.img.xz|Self-installation Image]] (MD5SUM: 75fa86638b6d6b2ecd8c65788f66a70b)|
| | [[http://dn.odroid.com/S905/Android/ODROID-C2/daily-odroidc2-eng-s905_6.0.1_master-65-v3.1.tar.gz|Fastboot update]] (MD5SUM: 2bf4cdeae263053e42fcd0b69dcf55ac)|

<color #00a2e8>File name : **selfinstall-odroidc2-eng-s905_6.0.1_master-65-v3.1.img**</color>

Official **Mirrors** by mdrjr\\
In US\\
[[http://www.odroid.in/mirror/dn.odroid.com/S905/Android/ODROID-C2]]
\\ 
In Germany\\
[[http://de.eu.odroid.in/?directory=.%2Fmirror%2Fdn.odroid.com%2FS905%2FAndroid%2FODROID-C2%2F]]

===== New updates =====
  * Fixed GPS Module ttyACM[USB] device number [[https://forum.odroid.com/viewtopic.php?f=137&t=27226&p=192249#p192249|enumeration problem]]
  * Support Wake-up by touchscreen input event. [[https://forum.odroid.com/viewtopic.php?f=113&t=27227#p193770|Special thanks to joerg]]

===== Kodi settings =======
  * Kodi 16 is crashing at the end of every video. Uncheck 'Allow hardware acceleration - amcodec' option to solve this issue.\\
  * Kodi 17 has no that issue. It always uses the MediaCodec HW acceleration.\\
  {{:en:screenshot_20170119-142843.png?200|}}


===== OS installation(flashing) =====
You can install this OS image into your MicroSD or eMMC with [[http://odroid.com/dokuwiki/doku.php?id=en:odroid_flashing_tools#flashingr|this guide]].
<WRAP center round important 80%>
A few users reported they couldn't see the Android logo on their TV while installing even though installation is proceeded. So please wait for 5~10 minutes since power on and red and blue LED is on. If blue led is started blinking then installation is proceeding, ODROID-C2 will reboot when finished.
</WRAP>
===== Upgrade Installation =====
This Marshmallow release doesn't support the update/upgrade from Lollipop.\\
You must install the self-installation image.


===== Reference boot.ini =====
<file ini boot.ini>
ODROIDC2-UBOOT-CONFIG

setenv dtbaddr 0x1000000
setenv loadaddr 0x20000000

# Resolution Configuration
# 'hdmimode' must be one of below to configure display resolution within
# supported by your TV or monitor.
#    Symbol             | Resolution
# ----------------------+-------------
#    "480p60hz"         | 720x480 Progressive 60Hz
#    "576p50hz"         | 720x576 Progressive 50Hz
#    "720p60hz"         | 1280x720 Progressive 60Hz
#    "720p50hz"         | 1280x720 Progressive 50Hz
#    "1080p60hz"        | 1920x1080 Progressive 60Hz
#    "1080p50hz"        | 1920x1080 Progressive 50Hz
#    "1080p30hz"        | 1920x1080 Progressive 30Hz
#    "1080p24hz"        | 1920x1080 Progressive 24Hz
#    "1080i60hz"        | 1920x1080 Interlaced 60Hz
#    "1080i50hz"        | 1920x1080 Interlaced 50Hz
#    "2160p60hz"        | 3840x2160 Progressive 60Hz
#    "2160p50hz"        | 3840x2160 Progressive 50Hz
#    "2160p30hz"        | 3840x2160 Progressive 30Hz
#    "2160p25hz"        | 3840x2160 Progressive 25Hz
#    "2160p24hz"        | 3840x2160 Progressive 24Hz
#    "2160p60hz420"     | 3840x2160 Progressive 60Hz YCbCr 4:2:0
#    "2160p50hz420"     | 3840x2160 Progressive 50Hz YCbCr 4:2:0
#    "640x480p60hz"     | 640x480 Progressive 60Hz
#    "800x480p60hz"     | 800x480 Progressive 60Hz
#    "800x600p60hz"     | 800x600 Progressive 60Hz
#    "1024x600p60hz"    | 1024x600 Progressive 60Hz
#    "1024x768p60hz"    | 1024x768 Progressive 60Hz
#    "1280x800p60hz"    | 1280x800 Progressive 60Hz
#    "1280x1024p60hz"   | 1280x1024 Progressive 60Hz
#    "1360x768p60hz"    | 1360x768 Progressive 60Hz
#    "1440x900p60hz"    | 1440x900 Progressive 60Hz
#    "1600x900p60hz"    | 1600x900 Progressive 60Hz
#    "1600x1200p60hz"   | 1600x1200 Progressive 60Hz
#    "1680x1050p60hz"   | 1680x1050 Progressive 60Hz
#    "1920x1200p60hz"   | 1920x1200 Progressive 60Hz
#    "2560x1080p60hz"   | 2560x1080 Progressive 60Hz
#    "2560x1440p60hz"   | 2560x1440 Progressive 60Hz
#    "2560x1600p60hz"   | 2560x1600 Progressive 60Hz
#    "3440x1440p60hz"   | 3440x1440 Progressive 60Hz
setenv hdmimode "1080p60hz"

setenv rootopt "root=/dev/mmcblk0p2 rw init=/init rootwait"
setenv consoleopt "console=ttyS0,115200"
setenv androidopt "androidboot.hardware=odroidc2 androidboot.serialno=${fbt_id#}"
setenv logoopt "osd1,loaded,${fb_addr},${hdmimode}"
setenv selinuxopt "androidboot.selinux=disabled"

# HDMI/DVI Mode Configuration
# This will enforce the signal type of display
# "hdmi" - For HDMI interface
# "dvi" - For DVI interface
setenv vout_mode "hdmi"

# Display Auto Detection
# "false" or "true"
setenv display_autodetect "true"

# HPD enable/disable option
setenv disablehpd "false"

# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"
setenv led_onoff "on"
suspend_hdmiphy=0

# Enable/Disable HDMI CEC Control
setenv hdmi_cec  "0"            # Disabled
# setenv hdmi_cec  "1"          # Enabled
# setenv hdmi_cec  "2"          # Enabled but disable auto TV switching ON

# Force HDMI to use RGB colorspace regardless of TV request
setenv hdmi_forcergb "0"      # Disabled
# setenv hdmi_forcergb "1"        # Enabled

# max cpu frequency in dvfs table / in MHz unit
# setenv max_freq "2016"  # 2.016GHz
# setenv max_freq "1944"  # 1.944GHz
# setenv max_freq "1920"  # 1.920GHz
# setenv max_freq "1896"  # 1.896GHz
# setenv max_freq "1752"  # 1.752GHz
# setenv max_freq "1680"  # 1.680GHz
# setenv max_freq "1656"  # 1.656GHz
# setenv max_freq "1536"  # 1.536GHz
setenv max_freq "1536"

# max cpu-cores
# setenv maxcpus "1"
# setenv maxcpus "2"
# setenv maxcpus "3"
setenv maxcpus "4"

# disable vu7
setenv disable_vu7 "false"

# invert touch screen x,y
setenv touch_invert_x "false"
setenv touch_invert_y "false"

# gpio power key : J2 (2x20) Pin#35, GPIOY.BIT3
#setenv gpiopower "214"

# usb timing tweak
setenv usbmulticam "false"

if test "${hdmi_cec}" = "0"; then setenv hdmitx "hdmitx=cec0"; fi
if test "${hdmi_cec}" = "1"; then setenv hdmitx "hdmitx=cecf"; fi
if test "${hdmi_cec}" = "2"; then setenv hdmitx "hdmitx=cec7"; fi
if test "${hdmi_forcergb}" = "1"; then setenv hdmitx "${hdmitx},forcergb"; fi

if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi

# Enable backlight_pwm
# disable : backlight "no"
# ODROID-VU5/7 : backlight "yes"
# ODROID-VU8 : backlight "invert"
setenv backlight_pwm "no"

setenv bootargs "${rootopt} ${consoleopt} hdmimode=${hdmimode} ${cmode} ${hdmitx} vout=${vout_mode} disablehpd=${disablehpd} logo=${logoopt} ${androidopt} ${selinuxopt} suspend_hdmiphy=${suspend_hdmiphy} led_onoff=${led_onoff} max_freq=${max_freq} maxcpus=${maxcpus} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y} usbmulticam=${usbmulticam} gpiopower=${gpiopower} backlight_pwm=${backlight_pwm}"

save

showlogo ${hdmimode}
#usb pwren

movi read dtb 0 ${dtbaddr}
# load kernel from vat or boot partition.
movi read boot 0 ${loadaddr}
#fatload mmc 0:1 ${loadaddr} Image_android
booti ${loadaddr} - ${dtbaddr}
</file>