We're no longer updating This wiki!!

This is an old revision of the document!


Release Note of Android Marshmallow (v2.8)


Summary

Release Date May/30/2017 KST
Release Type Regular release
Release Files Self-installation Image (MD5SUM: 23b17d84a9fe3cfc3838c92066233fcc)
Fastboot update (MD5SUM: f47a35538f38d43aa9f16463de338c44)

File name : selfinstall-odroidc2-eng-s905_6.0.1_master-59-v2.8.img

Official Mirrors by mdrjr
In US
http://www.odroid.in/mirror/dn.odroid.com/S905/Android/ODROID-C2
In Germany
http://de.eu.odroid.in/?directory=.%2Fmirror%2Fdn.odroid.com%2FS905%2FAndroid%2FODROID-C2%2F

New updates

Kodi settings

  • Kodi 16 is crashing at the end of every video. Uncheck 'Allow hardware acceleration - amcodec' option to solve this issue.
  • Kodi 17 has no that issue. It always uses the MediaCodec HW acceleration.

OS installation(flashing)

You can install this OS image into your MicroSD or eMMC with this guide.

A few users reported they couldn't see the Android logo on their TV while installing even though installation is proceeded. So please wait for 5~10 minutes since power on and red and blue LED is on. If blue led is started blinking then installation is proceeding, ODROID-C2 will reboot when finished.

Upgrade Installation

This Marshmallow release doesn't support the update/upgrade from Lollipop.
You must install the self-installation image.

Reference boot.ini

boot.ini
ODROIDC2-UBOOT-CONFIG
 
setenv dtbaddr 0x1000000
setenv loadaddr 0x20000000
 
# Resolution Configuration
# 'hdmimode' must be one of below to configure display resolution within
# supported by your TV or monitor.
#    Symbol             | Resolution
# ----------------------+-------------
#    "480p60hz"         | 720x480 Progressive 60Hz
#    "576p50hz"         | 720x576 Progressive 50Hz
#    "720p60hz"         | 1280x720 Progressive 60Hz
#    "720p50hz"         | 1280x720 Progressive 50Hz
#    "1080p60hz"        | 1920x1080 Progressive 60Hz
#    "1080p50hz"        | 1920x1080 Progressive 50Hz
#    "1080p30hz"        | 1920x1080 Progressive 30Hz
#    "1080p24hz"        | 1920x1080 Progressive 24Hz
#    "1080i60hz"        | 1920x1080 Interlaced 60Hz
#    "1080i50hz"        | 1920x1080 Interlaced 50Hz
#    "2160p60hz"        | 3840x2160 Progressive 60Hz
#    "2160p50hz"        | 3840x2160 Progressive 50Hz
#    "2160p30hz"        | 3840x2160 Progressive 30Hz
#    "2160p25hz"        | 3840x2160 Progressive 25Hz
#    "2160p24hz"        | 3840x2160 Progressive 24Hz
#    "2160p60hz420"     | 3840x2160 Progressive 60Hz YCbCr 4:2:0
#    "2160p50hz420"     | 3840x2160 Progressive 50Hz YCbCr 4:2:0
#    "640x480p60hz"     | 640x480 Progressive 60Hz
#    "800x480p60hz"     | 800x480 Progressive 60Hz
#    "800x600p60hz"     | 800x600 Progressive 60Hz
#    "1024x600p60hz"    | 1024x600 Progressive 60Hz
#    "1024x768p60hz"    | 1024x768 Progressive 60Hz
#    "1280x800p60hz"    | 1280x800 Progressive 60Hz
#    "1280x1024p60hz"   | 1280x1024 Progressive 60Hz
#    "1360x768p60hz"    | 1360x768 Progressive 60Hz
#    "1440x900p60hz"    | 1440x900 Progressive 60Hz
#    "1600x900p60hz"    | 1600x900 Progressive 60Hz
#    "1600x1200p60hz"   | 1600x1200 Progressive 60Hz
#    "1680x1050p60hz"   | 1680x1050 Progressive 60Hz
#    "1920x1200p60hz"   | 1920x1200 Progressive 60Hz
#    "2560x1080p60hz"   | 2560x1080 Progressive 60Hz
#    "2560x1440p60hz"   | 2560x1440 Progressive 60Hz
#    "2560x1600p60hz"   | 2560x1600 Progressive 60Hz
#    "3440x1440p60hz"   | 3440x1440 Progressive 60Hz
setenv hdmimode "1080p60hz"
 
setenv rootopt "root=/dev/mmcblk0p2 rw init=/init rootwait"
setenv consoleopt "console=ttyS0,115200"
setenv androidopt "androidboot.hardware=odroidc2 androidboot.serialno=${fbt_id#}"
setenv logoopt "osd1,loaded,${fb_addr},${hdmimode}"
setenv selinuxopt "androidboot.selinux=disabled"
 
# HDMI/DVI Mode Configuration
# This will enforce the signal type of display
# "hdmi" - For HDMI interface
# "dvi" - For DVI interface
setenv vout_mode "hdmi"
 
# Display Auto Detection
# "false" or "true"
setenv display_autodetect "true"
 
# HPD enable/disable option
setenv disablehpd "false"
 
# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"
setenv led_onoff "on"
suspend_hdmiphy=0
 
# max cpu frequency in dvfs table / in MHz unit
# setenv max_freq "2016"  # 2.016GHz
# setenv max_freq "1944"  # 1.944GHz
# setenv max_freq "1920"  # 1.920GHz
# setenv max_freq "1896"  # 1.896GHz
# setenv max_freq "1752"  # 1.752GHz
# setenv max_freq "1680"  # 1.680GHz
# setenv max_freq "1656"  # 1.656GHz
# setenv max_freq "1536"  # 1.536GHz
setenv max_freq "1536"
 
# max cpu-cores
# setenv maxcpus "1"
# setenv maxcpus "2"
# setenv maxcpus "3"
setenv maxcpus "4"
 
# disable vu7
setenv disable_vu7 "false"
 
# invert touch screen x,y
setenv touch_invert_x "false"
setenv touch_invert_y "false"
 
# gpio power key : J2 (2x20) Pin#35, GPIOY.BIT3
#setenv gpiopower "214"
 
# usb timing tweak
setenv usbmulticam "false"
 
if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
 
setenv bootargs "${rootopt} ${consoleopt} hdmimode=${hdmimode} ${cmode} hdmitx=${cecconfig} vout=${vout_mode} disablehpd=${disablehpd} logo=${logoopt} ${androidopt} ${selinuxopt} suspend_hdmiphy=${suspend_hdmiphy} led_onoff=${led_onoff} max_freq=${max_freq} maxcpus=${maxcpus} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y} usbmulticam=${usbmulticam} gpiopower=${gpiopower}"
 
save
 
showlogo ${hdmimode}
#usb pwren
 
movi read dtb 0 ${dtbaddr}
# load kernel from vat or boot partition.
movi read boot 0 ${loadaddr}
#fatload mmc 0:1 ${loadaddr} Image_android
booti ${loadaddr} - ${dtbaddr}
en/c2_android_release_note_marshmallow_v2.8.1496226768.txt.gz · Last modified: 2017/05/31 19:02 by odroid
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0