en:c1_wb_16x2lcd [ODROID Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Use to Weather-Board on ubuntu ======
{{:en:c1:16x2lcd_bmp180.jpg?250|}}
{{:en:c1:16x2lcd_si702x.jpg?250|}}
{{:en:c1:16x2lcd_si1132.jpg?250|}}

This is a good example to let you know how to access the I2C bus on the 40-Pin GPIO of **ODROID-C1**.

=== Preparations ===
  * [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141578608433|ODROID-C1]]
  * [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141637550797|16x2 LCD + IO Shield]]
  * [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G140264897696|Weather Board]]
  * [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141628490396|8GB eMMC Module C1 Linux]]


If you have the **Weather Board 2**, use the updated guide in this link.\\
[[en:weather-board|Weather Board 2]]

===== How to run =====
=== Add to Sensors to the fdt(device tree source) ===
1. Install one dependency.
  sudo apt-get install device-tree-compiler

2. Enable Sensors on device tree.

If you want to use I2C-B, you change I2C address to c11087c0.\\
I2C-A : c1108500\\
I2C-B : c11087c0\\

ex) fdtput -c /media/boot/meson8b_odroidc.dtb /i2c@c11087c0/bmp085@77

<code>
sudo -s
fdtput -c /media/boot/meson8b_odroidc.dtb /i2c@c1108500/bmp085@77
fdtput -c /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si702x@40
fdtput -c /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si1132@60

fdtput -t s /media/boot/meson8b_odroidc.dtb /i2c@c1108500/bmp085@77 compatible "bosch,bmp085"
fdtput -t s /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si702x@40 compatible "silab,si702x"
fdtput -t s /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si1132@60 compatible "silab,si1132"

fdtput -t x /media/boot/meson8b_odroidc.dtb /i2c@c1108500/bmp085@77 reg 0x77
fdtput -t x /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si702x@40 reg 0x40
fdtput -t x /media/boot/meson8b_odroidc.dtb /i2c@c1108500/si1132@60 reg 0x60
</code>

3. Enable i2c module to autoload on boot.
  echo aml_i2c >> /etc/modules

4. Now reboot your board.
=== Install wiringPi library. ===
1. Get the wiringPi library compatible **ODROID-C1**
  git clone https://github.com/hardkernel/wiringPi

2. Build the library
  cd wiringPi
  ./build

=== Compile & Run ===
  gcc -o <create excute file name> <source file name> -lwiringPi -lwiringPiDev -lpthread
  sudo ./<created excute file name>

Temperature & Presure Sensors [[wb_bmp085 | wb_bmp085.c]]\\
Temperature & Humidity Sensors [[wb_si702x | wb_si702x.c]]\\
Visible & IR & UV sensors [[wb_si1132 | wb_1132.c]]