We're no longer updating This wiki!!

Expansion Connectors (J2)

Default gpio status

GPIO Name Mode V PU/PD PIN PIN PU/PD V Mode Name GPIO
- 3.3V - - - 1 2 - - - 5.0V -
74 I2CA_SDA IN 1 - 3 4 - - - 5.0V -
75 I2CA_SCL IN 1 - 5 6 - - - GND -
83 GPIOY.3 IN 0 P/U 7 8 P/U 1 ALT1 GPIOX.16 113
- GND - - - 9 10 P/U 1 ALT1 GPIOX.17 114
88 GPIOY.8 IN 1 P/U 11 12 P/U 0 IN GPIOY.7 87
116 GPIOX.19 IN 1 P/U 13 14 - - - GND -
115 GPIOX.18 IN 0 P/D 15 16 P/U 1 IN GPIOX.7 104
- 3.3V - - - 17 18 P/U 1 IN GPIOX.5 102
107 GPIOX.10 IN 1 P/U 19 20 - - - GND -
106 GPIOX.9 IN 1 P/U 21 22 P/U 1 IN GPIOX.6 103
105 GPIOX.8 IN 1 P/U 23 24 P/D 0 IN GPIOX.20 117
- GND - - - 25 26 P/U 1 IN GPIOX.21 118
76 I2CB_SDA IN 1 - 27 28 - 1 IN I2CB_SCL 77
101 GPIOX.4 IN 1 P/U 29 30 - - - GND -
100 GPIOX.3 IN 1 P/U 31 32 P/U 1 IN GPIOX.2 99
108 GPIOX.11 IN 0 P/D 33 34 - - - GND -
97 GPIOX.0 IN 1 P/U 35 36 P/U 1 IN GPIOX.1 98
- ADC.AIN0 - - - 37 38 - - - 1.8V REF -
- GND - - - 39 40 - - - ADC.AIN1 -

modprobe aml_i2c and spicc

GPIO Name Mode V PU/PD PIN PIN PU/PD V Mode Name GPIO
- 3.3V - - - 1 2 - - - 5.0V -
74 I2CA_SDA ALT5 1 - 3 4 - - - 5.0V -
75 I2CA_SCL ALT5 1 - 5 6 - - - GND -
83 GPIOY.3 IN 0 P/D 7 8 P/U 1 ALT1 GPIOX.16 113
- GND - - - 9 10 P/U 1 ALT1 GPIOX.17 114
88 GPIOY.8 IN 1 P/U 11 12 P/D 0 IN GPIOY.7 87
116 GPIOX.19 IN 1 P/U 13 14 - - - GND -
115 GPIOX.18 IN 0 P/D 15 16 P/U 1 IN GPIOX.7 104
- 3.3V - - - 17 18 P/U 1 IN GPIOX.5 102
107 GPIOX.10 ALT4 1 P/U 19 20 - - - GND -
106 GPIOX.9 ALT4 1 P/U 21 22 P/U 1 IN GPIOX.6 103
105 GPIOX.8 ALT4 1 P/U 23 24 P/D 1 OUT GPIOX.20 117
- GND - - - 25 26 P/U 1 OUT GPIOX.21 118
76 I2CB_SDA ALT5 1 - 27 28 - - ALT5 I2CB_SCL 77
101 GPIOX.4 IN 1 P/U 29 30 - - - GND -
100 GPIOX.3 IN 1 P/U 31 32 P/U 1 IN GPIOX.2 99
108 GPIOX.11 IN 0 P/D 33 34 - - - GND -
97 GPIOX.0 IN 1 P/U 35 36 P/U 1 IN GPIOX.1 98
- ADC.AIN0 - - - 37 38 - - - 1.8V REF -
- GND - - - 39 40 - - - ADC.AIN1 -

Expansion Connectors (J7)

GPIO Name Mode V PU/PD PIN
- GND - - - 1
6 GPIOAO.6 IN 0 - 2
- 5.0V - - - 3
8 GPIOAO.8 ALT2 0 P/U 4
10 GPIOAO.10 ALT2 0 P/U 5
9 GPIOAO.9 ALT2 0 P/U 6
11 GPIOAO.11 ALT2 0 P/U 7

GPIO Status Check Program

gpio_status.c
//------------------------------------------------------------------------------------------------------------
//
// ODROID-C1 GPIO Status Check Application.
//
// Compile : gcc -o <create excute file name> <source file name>
// Run : sudo ./<created excute file name>
//
//------------------------------------------------------------------------------------------------------------
#include <stdio.h>
#include <stdarg.h>
#include <stdint.h>
#include <stdlib.h>
#include <ctype.h>
#include <poll.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <time.h>
#include <fcntl.h>
#include <pthread.h>
#include <sys/time.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
 
//------------------------------------------------------------------------------
//
// Global handle Define
//
//------------------------------------------------------------------------------
 
// MMAP Address for GPIO
#define	GPIO_REG_MAP		0xC1108000
#define	GPIO_AO_REG_MAP		0xC8100000
 
#define	BLOCK_SIZE  (4*1024)
 
static volatile unsigned int	*gpio;
static volatile unsigned int	*gpio_ao;
 
static volatile unsigned int	*ao_in;
 
//------------------------------------------------------------------------------
// refer kernel/arch/arm/mach-meson8b/include/mach/gpio.h
#define	GPIOAO_PIN_START	0
#define	GPIOAO_PIN_END		13
 
#define GPIOAO_FSEL_REG_OFFSET	0x09
#define GPIOAO_OUTP_REG_OFFSET	0x09
#define GPIOAO_INP_REG_OFFSET	0x0A
#define GPIOAO_PUPD_REG_OFFSET	0x0B
#define GPIOAO_PUEN_REG_OFFSET	0x0B
 
//------------------------------------------------------------------------------
#define	GPIODV_PIN_START	50
#define	GPIODV_PIN_END		79
 
#define GPIODV_FSEL_REG_OFFSET	0x12
#define GPIODV_OUTP_REG_OFFSET	0x13
#define GPIODV_INP_REG_OFFSET	0x14
#define GPIODV_PUPD_REG_OFFSET	0x3A
#define GPIODV_PUEN_REG_OFFSET	0x48
 
//------------------------------------------------------------------------------
#define	GPIOY_PIN_START		80
#define	GPIOY_PIN_END		96
 
#define GPIOY_FSEL_REG_OFFSET   0x0F
#define GPIOY_OUTP_REG_OFFSET   0x10
#define GPIOY_INP_REG_OFFSET    0x11
#define GPIOY_PUPD_REG_OFFSET   0x3D
#define GPIOY_PUEN_REG_OFFSET   0x4B
 
//------------------------------------------------------------------------------
#define	GPIOX_PIN_START		97
#define	GPIOX_PIN_END		118
 
#define GPIOX_FSEL_REG_OFFSET   0x0C
#define GPIOX_OUTP_REG_OFFSET   0x0D
#define GPIOX_INP_REG_OFFSET    0x0E
#define GPIOX_PUPD_REG_OFFSET   0x3E
#define GPIOX_PUEN_REG_OFFSET   0x4C
 
//------------------------------------------------------------------------------
#define	MUX_REG0		0x5	// MUX_AO Block
#define	MUX_REG1		0x2D
#define	MUX_REG2		0x2E
#define	MUX_REG3		0x2F
#define	MUX_REG4		0x30
#define	MUX_REG5		0x31
#define	MUX_REG6		0x32
#define	MUX_REG7		0x33
#define	MUX_REG8		0x34
#define	MUX_REG9		0x35
 
//------------------------------------------------------------------------------
#define	BIT(x)			(1 << x)
 
//------------------------------------------------------------------------------
const char MODE_STR[8][5] = {
	"  - ",
	"ALT1",
	"ALT2",
	"ALT3",
	"ALT4",
	"ALT5",
	"IN",
	"OUT",
};
 
//------------------------------------------------------------------------------
const char PUPD_STR[3][5] = {
	" - ",
	"P/U",
	"P/D",
};
 
//------------------------------------------------------------------------------
struct	header_info	{
	int	gpio;
	char	name[10];
};
 
//------------------------------------------------------------------------------
const struct header_info header_J2[40] = {
	{    -1, "3.3V"		}, {    -1, "5.0V"	},
	{    74, "I2CA_SDA"	}, {    -1, "5.0V"	},
	{    75, "I2CA_SCL"	}, {    -1, "GND"	},
	{    83, "GPIOY.3"	}, {   113, "GPIOX.16"	},
	{    -1, "GND"		}, {   114, "GPIOX.17"	},
	{    88, "GPIOY.8"	}, {    87, "GPIOY.7"	},
	{   116, "GPIOX.19"	}, {    -1, "GND"	},
	{   115, "GPIOX.18"	}, {   104, "GPIOX.7"	},
	{    -1, "3.3V"		}, {   102, "GPIOX.5"	},
	{   107, "GPIOX.10"	}, {    -1, "GND"	},
	{   106, "GPIOX.9"	}, {   103, "GPIOX.6"	},
	{   105, "GPIOX.8"	}, {   117, "GPIOX.20"	},
	{    -1, "GND"		}, {   118, "GPIOX.21"	},
	{    76, "I2CB_SDA"	}, {    77, "I2CB_SCL"	},
	{   101, "GPIOX.4"	}, {    -1, "GND"	},
	{   100, "GPIOX.3"	}, {    99, "GPIOX.2"	},
	{   108, "GPIOX.11"	}, {    -1, "GND"	},
	{    97, "GPIOX.0"	}, {    98, "GPIOX.1"	},
	{    -1, "ADC.AIN0"	}, {    -1, "1.8V REF"	},
	{    -1, "GND"		}, {    -1, "ADC.AIN1"	},
};
 
//------------------------------------------------------------------------------
const struct header_info header_J7[7] = {
	{    -1, "GND"		},
	{     6, "GPIOAO.6"	},
	{    -1, "5.0V"		},
	{     8, "GPIOAO.8"	},
	{    10, "GPIOAO.10"	},
	{     9, "GPIOAO.9"	},
	{    11, "GPIOAO.11"	},
};
 
//------------------------------------------------------------------------------------------------------------
int get_mode_gpiox (int pin)
{
	switch(pin)	{
		case	0:
			if (*(gpio + MUX_REG8) & BIT(5))	return	1;
			if (*(gpio + MUX_REG5) & BIT(14))	return	2;
		break;
		case	1:
			if (*(gpio + MUX_REG8) & BIT(4))	return	1;
			if (*(gpio + MUX_REG5) & BIT(13))	return	2;
		break;
		case	2:
			if (*(gpio + MUX_REG8) & BIT(3))	return	1;
			if (*(gpio + MUX_REG5) & BIT(13))	return	2;
		break;
		case	3:
			if (*(gpio + MUX_REG8) & BIT(2))	return	1;
			if (*(gpio + MUX_REG5) & BIT(13))	return	2;
		break;
		case	4:
			if ((*(gpio + MUX_REG5) & BIT(29)) && (*(gpio + MUX_REG5) & BIT(12)))
				return	1;
			if (*(gpio + MUX_REG3) & BIT(30))	return	2;
			if (*(gpio + MUX_REG4) & BIT(17))	return	3;
		break;
		case	5:
			if ((*(gpio + MUX_REG5) & BIT(28)) && (*(gpio + MUX_REG5) & BIT(12)))
				return	1;
			if (*(gpio + MUX_REG3) & BIT(29))	return	2;
			if (*(gpio + MUX_REG4) & BIT(16))	return	3;
		break;
		case	6:
			if ((*(gpio + MUX_REG5) & BIT(28)) && (*(gpio + MUX_REG5) & BIT(12)))
				return	1;
			if (*(gpio + MUX_REG3) & BIT(27))	return	2;
			if (*(gpio + MUX_REG4) & BIT(15))	return	3;
			if (*(gpio + MUX_REG5) & BIT(9))	return	4;
		break;
		case	7:
			if ((*(gpio + MUX_REG5) & BIT(28)) && (*(gpio + MUX_REG5) & BIT(12)))
				return	1;
			if (*(gpio + MUX_REG3) & BIT(27))	return	2;
			if (*(gpio + MUX_REG4) & BIT(14))	return	3;
			if (*(gpio + MUX_REG5) & BIT(8))	return	4;
		break;
		case	8:
			if (*(gpio + MUX_REG8) & BIT(1))	return	1;
			if (*(gpio + MUX_REG5) & BIT(11))	return	2;
			if (*(gpio + MUX_REG6) & BIT(19))	return	3;
			if (*(gpio + MUX_REG4) & BIT(22))	return	4;
			if (*(gpio + MUX_REG3) & BIT(6))	return	5;
		break;
		case	9:
			if (*(gpio + MUX_REG8) & BIT(0))	return	1;
			if (*(gpio + MUX_REG5) & BIT(10))	return	2;
			if (*(gpio + MUX_REG6) & BIT(18))	return	3;
			if (*(gpio + MUX_REG4) & BIT(24))	return	4;
			if (*(gpio + MUX_REG3) & BIT(6))	return	5;
		break;
		case	10:
			if (*(gpio + MUX_REG3) & BIT(22))	return	1;
			if ((*(gpio + MUX_REG7) & BIT(31)) && (*(gpio + MUX_REG9) & BIT(19)))
				return	2;
			if (*(gpio + MUX_REG6) & BIT(17))	return	3;
			if (*(gpio + MUX_REG4) & BIT(23))	return	4;
			if (*(gpio + MUX_REG3) & BIT(8))	return	5;
		break;
		case	11:
			if (*(gpio + MUX_REG3) & BIT(20))	return	1;
			if (*(gpio + MUX_REG7) & BIT(30))	return	2;
			if (*(gpio + MUX_REG2) & BIT(3))	return	5;
		break;
		case	16:
			if (*(gpio + MUX_REG4) & BIT(9))	return	1;
			if (*(gpio + MUX_REG4) & BIT(21))	return	4;
			if (*(gpio + MUX_REG4) & BIT(5))	return	5;
		break;
		case	17:
			if (*(gpio + MUX_REG4) & BIT(8))	return	1;
			if (*(gpio + MUX_REG4) & BIT(20))	return	4;
			if (*(gpio + MUX_REG4) & BIT(4))	return	5;
		break;
		case	18:
			if (*(gpio + MUX_REG4) & BIT(7))	return	1;
			if (*(gpio + MUX_REG4) & BIT(19))	return	4;
		break;
		case	19:
			if (*(gpio + MUX_REG4) & BIT(6))	return	1;
			if (*(gpio + MUX_REG4) & BIT(18))	return	4;
		break;
		case	20:
			if (*(gpio + MUX_REG6) & BIT(16))	return	3;
			if (*(gpio + MUX_REG4) & BIT(25))	return	4;
			if (*(gpio + MUX_REG3) & BIT(9))	return	5;
		break;
		case	21:
		break;
		default	:
			return	0;
	}
	return	*(gpio + GPIOX_FSEL_REG_OFFSET) & BIT(pin) ? 6 : 7;
}
 
//------------------------------------------------------------------------------------------------------------
int get_mode_gpioy (int pin)
{
	switch(pin)	{
		case	0:
			if (*(gpio + MUX_REG3) & BIT(2))	return	1;
		break;
		case	1:
			if (*(gpio + MUX_REG3) & BIT(1))	return	1;
		break;
		case	3:
			if (*(gpio + MUX_REG1) & BIT(7))	return	2;
			if (*(gpio + MUX_REG3) & BIT(18))	return	3;
		break;
		case	6:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
		break;
		case	7:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
		break;
		case	8:
			if (*(gpio + MUX_REG3) & BIT(0))	return	1;
		break;
		case	9:
			if (*(gpio + MUX_REG3) & BIT(4))	return	1;
		break;
		case	10:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
		break;
		case	11:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
		break;
		case	12:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
		break;
		case	13:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
			if (*(gpio + MUX_REG5) & BIT(7))	return	3;
		break;
		case	14:
			if (*(gpio + MUX_REG3) & BIT(5))	return	1;
			if (*(gpio + MUX_REG5) & BIT(6))	return	3;
		break;
		default	:
			return	0;
	}
	return	*(gpio + GPIOY_FSEL_REG_OFFSET) & BIT(pin) ? 6 : 7;
}
 
//------------------------------------------------------------------------------------------------------------
int get_mode_gpiodv (int pin)
{
	switch(pin)	{
		case	24:
			if (*(gpio + MUX_REG6) & BIT(23))	return	4;
			if (*(gpio + MUX_REG9) & BIT(31))	return	5;
		break;
		case	25:
			if (*(gpio + MUX_REG6) & BIT(22))	return	4;
			if (*(gpio + MUX_REG9) & BIT(30))	return	5;
		break;
		case	26:
			if (*(gpio + MUX_REG6) & BIT(21))	return	4;
			if (*(gpio + MUX_REG9) & BIT(29))	return	5;
		break;
		case	27:
			if (*(gpio + MUX_REG6) & BIT(20))	return	4;
			if (*(gpio + MUX_REG9) & BIT(28))	return	5;
		break;
		default	:
			return	0;
	}
	return	*(gpio + GPIODV_FSEL_REG_OFFSET) & BIT(pin) ? 6 : 7;
}
 
//------------------------------------------------------------------------------------------------------------
int get_mode_gpioao (int pin)
{
	switch(pin)	{
		case	0:
			if (*(gpio_ao + MUX_REG0) & BIT(12))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(26))	return	3;
		break;
		case	1:
			if (*(gpio_ao + MUX_REG0) & BIT(11))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(25))	return	3;
		break;
		case	2:
			if (*(gpio_ao + MUX_REG0) & BIT(10))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(8))	return	3;
		break;
		case	3:
			if (*(gpio_ao + MUX_REG0) & BIT(9))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(22))	return	2;
			if (*(gpio_ao + MUX_REG0) & BIT(7))	return	3;
		break;
		case	4:
			if (*(gpio_ao + MUX_REG0) & BIT(6))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(2))	return	2;
			if (*(gpio_ao + MUX_REG0) & BIT(24))	return	3;
		break;
		case	5:
			if (*(gpio_ao + MUX_REG0) & BIT(5))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(1))	return	2;
			if (*(gpio_ao + MUX_REG0) & BIT(23))	return	3;
		break;
		case	6:
			if (*(gpio_ao + MUX_REG0) & BIT(18))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(16))	return	4;
			if (*(gpio + MUX_REG1) & BIT(13))	return	5;
		break;
		case	7:
			if (*(gpio_ao + MUX_REG0) & BIT(0))	return	1;
			if (*(gpio_ao + MUX_REG0) & BIT(21))	return	2;
		break;
		case	8:
			if (*(gpio_ao + MUX_REG0) & BIT(30))	return	2;
			return	1;
		case	9:
			if (*(gpio_ao + MUX_REG0) & BIT(29))	return	2;
			if (*(gpio + MUX_REG1) & BIT(15))	return	5;
			return	1;
		case	10:
			if (*(gpio_ao + MUX_REG0) & BIT(28))	return	2;
			if (*(gpio + MUX_REG1) & BIT(14))	return	5;
			return	1;
		case	11:
			if (*(gpio_ao + MUX_REG0) & BIT(27))	return	2;
			return	1;
		case	12:
			if (*(gpio_ao + MUX_REG0) & BIT(17))	return	1;
		break;
		case	13:
			if (*(gpio_ao + MUX_REG0) & BIT(31))	return	1;
		break;
		default	:
			return	0;
	}
	return	*(gpio_ao + GPIOAO_FSEL_REG_OFFSET) & BIT(pin) ? 6 : 7;
}
 
//------------------------------------------------------------------------------------------------------------
int get_mode (int pin)
{
	switch (pin)	{
		case	GPIOX_PIN_START...GPIOX_PIN_END:
			return	get_mode_gpiox(pin - GPIOX_PIN_START);
		case	GPIOY_PIN_START...GPIOY_PIN_END:
			return	get_mode_gpioy(pin - GPIOY_PIN_START);
		case	GPIODV_PIN_START...GPIODV_PIN_END:
			return	get_mode_gpiodv(pin - GPIODV_PIN_START);
		case	GPIOAO_PIN_START...GPIOAO_PIN_END:
			return	get_mode_gpioao(pin - GPIOAO_PIN_START);
		default	:
			break;
	}
	return	0;
}
 
//------------------------------------------------------------------------------------------------------------
int get_pupd (int pin)
{
	switch (pin)	{
		case	GPIOX_PIN_START...GPIOX_PIN_END:
			if (*(gpio + GPIOX_PUEN_REG_OFFSET) & BIT(pin - GPIOX_PIN_START)) {
				return	*(gpio + GPIOX_PUPD_REG_OFFSET) & BIT(pin - GPIOX_PIN_START) ?
					1 : 2;
			}
		break;
		case	GPIOY_PIN_START...GPIOY_PIN_END:
			if (*(gpio + GPIOY_PUEN_REG_OFFSET) & BIT(pin - GPIOY_PIN_START)) {
				return	*(gpio + GPIOY_PUPD_REG_OFFSET) & BIT(pin - GPIOY_PIN_START) ?
					1 : 2;
			}
		break;
		case	GPIODV_PIN_START...GPIODV_PIN_END:
			if (*(gpio + GPIODV_PUEN_REG_OFFSET) & BIT(pin - GPIODV_PIN_START)) {
				return	*(gpio + GPIODV_PUPD_REG_OFFSET) & BIT(pin - GPIODV_PIN_START) ?
					1 : 2;
			}
		break;
		case	GPIOAO_PIN_START...GPIOAO_PIN_END:
			if (*(gpio_ao + GPIOAO_PUEN_REG_OFFSET) & BIT(pin - GPIOAO_PIN_START)) {
				return	*(gpio_ao + GPIOAO_PUPD_REG_OFFSET) & BIT(pin - GPIOAO_PIN_START + 16) ?
					1 : 2;
			}
		break;
		default	:
			break;
	}
	return	0;	// PU/PD disable
}
 
//------------------------------------------------------------------------------------------------------------
int get_status (int pin)
{
	switch (pin)	{
		case	GPIOX_PIN_START...GPIOX_PIN_END:
			return	*(gpio + GPIOX_INP_REG_OFFSET) & BIT(pin - GPIOX_PIN_START) ?
				1 : 0;
		case	GPIOY_PIN_START...GPIOY_PIN_END:
			return	*(gpio + GPIOY_INP_REG_OFFSET) & BIT(pin - GPIOY_PIN_START) ?
				1 : 0;
		case	GPIODV_PIN_START...GPIODV_PIN_END:
			return	*(gpio + GPIODV_INP_REG_OFFSET) & BIT(pin - GPIODV_PIN_START) ?
				1 : 0;
		case	GPIOAO_PIN_START...GPIOAO_PIN_END:
			return	*(gpio_ao + GPIOAO_INP_REG_OFFSET) & BIT(pin - GPIOAO_PIN_START) ?
				1 : 0;
		default	:
			break;
	}
	return	0;
}
 
//------------------------------------------------------------------------------------------------------------
//------------------------------------------------------------------------------------------------------------
//
// system init
//
//------------------------------------------------------------------------------------------------------------
int system_init(void)
{
	int	fd;
 
	if ((fd = open ("/dev/mem", O_RDWR | O_SYNC | O_CLOEXEC) ) < 0) {
		fprintf(stderr, "/dev/mem open error!\n");	fflush(stdout);
		return -1;
	}
 
	gpio =    (unsigned int *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_REG_MAP);
	gpio_ao = (unsigned int *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_AO_REG_MAP);
 
	if((unsigned int)gpio == -1 || (unsigned int)gpio_ao == -1) {
		fprintf(stderr, "mmap error!\n");	fflush(stdout);
		return	-1;
	}
	return	0;
}
 
//------------------------------------------------------------------------------------------------------------
//
// Start Program
//
//------------------------------------------------------------------------------------------------------------
int main (int argc, char *argv[])
{
	int	i;
 
	if (system_init() < 0)
	{
		fprintf (stderr, "%s: System Init failed\n", __func__); fflush(stdout);
		return -1;
	}
 
	printf("+------+----------+------+---+-------+--- J2 ---+-------+---+------+----------+------+\n");
	printf("| GPIO |   Name   | Mode | V | PU/PD | Physical | PU/PD | V | Mode |   Name   | GPIO |\n");
	printf("+------+----------+------+---+-------+----++----+-------+---+------+----------+------+\n");
	for (i = 0; i < 40; i += 2)	{
		if (header_J2[i].gpio != -1)	{
			printf("|  %3d | %8s | %4s | %d |  %4s | %2d |",
				header_J2[i].gpio,
				header_J2[i].name,
				MODE_STR[get_mode(header_J2[i].gpio)],
				get_status(header_J2[i].gpio),
				PUPD_STR[get_pupd(header_J2[i].gpio)],
				i + 1);
		}
		else	{
			printf("|   -  | %8s |   -  | - |    -  | %2d |",
				header_J2[i].name,
				i + 1);
		}
 
		if (header_J2[i+1].gpio != -1)	{
			printf("| %2d |  %4s | %d | %4s | %8s |  %3d |\n",
				i + 2,
				PUPD_STR[get_pupd(header_J2[i+1].gpio)],
				get_status(header_J2[i+1].gpio),
				MODE_STR[get_mode(header_J2[i+1].gpio)],
				header_J2[i+1].name,
				header_J2[i+1].gpio);
		}		
		else	{
			printf("| %2d |    -  | - |   -  | %8s |   -  |\n",
				i + 2,
				header_J2[i+1].name);
		}
	}
	printf("+------+----------+------+---+-------+----++----+-------+---+------+----------+------+\n");
 
	printf("+------+-----------+------+---+-------+--- J7 ---+\n");
	printf("| GPIO |   Name    | Mode | V | PU/PD | Physical |\n");
	printf("+------+-----------+------+---+-------+----------+\n");
 
	for(i = 0; i < 7; i ++)	{
		if (header_J7[i].gpio != -1)	{
			printf("|  %3d | %9s | %4s | %d |  %4s |       %2d |\n",
				header_J7[i].gpio,
				header_J7[i].name,
				MODE_STR[get_mode(header_J7[i].gpio)],
				get_status(header_J7[i].gpio),
				PUPD_STR[get_pupd(header_J7[i].gpio)],
				i + 1);
		}
		else	{
			printf("|   -  | %9s |   -  | - |    -  |       %2d |\n",
				header_J7[i].name,
				i + 1);
		}
	}
	printf("+------+-----------+------+---+-------+----------+\n");
	fflush(stdout);
 
	return 0 ;
}
 
//------------------------------------------------------------------------------------------------------------
en/c1_gpio_default.txt · Last modified: 2016/05/28 11:26 by odroid
CC Attribution-Share Alike 3.0 Unported
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0