Table of Contents

Preface

This page contains major component information of Odroid. * If you buy Odroid, full schematics is supplied with SD-CARD.

Block diagram & PCB

[attachment:odroidblock.gif] [attachment:odroidboard.jpg]

CPU

S5PC100 is a 32-bit RISC low power, high performance micro-processor solution for mobile phones and general applications, and integrates 833Mhz CortexA8 which implements the ARM architecture V7-A with numerous peripherals to support. To provide optimized H/W performance for the 3G & 3.5G communication services, S5PC100 adopts a 64-bit internal bus architecture and includes many powerful hardware accelerators for tasks such as motion video processing, display control and scaling. Integrated Multi Format Codec (MFC) supports encoding and decoding of MPEG4, H.263, H.264 and decoding of MPEG2, VC1, Divx/Xvid. This H/W Encoder/Decoder supports real-time video conferencing and Analog TV out for NTSC and PAL mode, HDMI output for HDTVThe S5PC100 has an optimized interface to external memory capable of sustaining the demanding memory bandwidth required in high-end communication services. The memory system has Flash/ROM external memory ports for parallel access and DRAM port for high bandwidth. DRAM port can be configured to support mobile DDR, LPDDR2, and DDR2. Flash/ROM Port supports SLC/MLC NAND Flash, NOR Flash, OneNAND and ROM type external memory.OverviewTo reduce total system cost and enhance overall functionality, S5PC100 includes many hardware peripherals such as TFT 24-bit true color LCD controller, Camera Interface, MIPI DSI, CSI-2 and HSI, System Manager for power management, CF+/ATA I/F, 4-channel UART, 24-channel DMA, 4- channel Timers, configurable General I/O Ports, 3-ch IIS, 2-ch S/PDIF, 2-ch CAN bus, IIC bus interface, 3-ch HS-SPI, USB Host 1.1 operating at full speed(12Mbps), USB OTG 2.0 operating at high speed (480Mbps), 3-ch SD Host & High Speed Multi-Media Card Interface and PLLs for clock generation.

[attachment:cpu.jpg]

Features * CortexA8 based CPU Subsystem with NEON * 32/32KB I/D Cache, 256KB L2 Cache * 833MHz Operating Frequency * 64-bit Multi-layer bus architecture * Advanced power management for mobile applications * ROM for secure booting and RAM for security function * 8-bit ITU 601/656 Camera Interface up to 8M pixel for scaled and 16M pixel for un-scaled resolution * Multi Format CODEC provides encoding and decoding of MPEG-4/H.263/H.264up to 30fps@HD(720p) and decoding of MPEG-2/VC1/Divx/Xvid video up to 30fps@HD(720p) * JPEG codec support up to 30Mpixels/s * 3D Graphics Acceleration with Programmable Shaderup to 10M triangles/s (Transform only) * 2D Graphics Acceleration with BitBlitand Rotation, up to 40Mpixels/s * 1/2/4/8 bpppalletized or 8/16/24bpp non-palletized Color-TFT support up to 2048×2048 * TV-out for NTSC and PAL mode and HDMI 1.2 interface support with PHY * MIPI-HSI, MIPI-DSI and MIPI-CSI interface support * 1-channel AC-97 audio codec interface, 2-ch PCM serial audio interface, and 3-channel 24-bit I2Sinterface support (5.1ch support) * 2-channel S/PDIF interface support for digital audio * 2-channel I2C interface (up to 400KHz) support including 1-channel for HDMI * 3-channel HS-SPI, up to 52Mbps * 4-channel UART including 4Mbps port for Bluetooth 2.0 and IrDA port for SIR/MIR/FIR * On-chip USB 2.0 OTG supporting high speed (480Mbps, on-chip transceiver) * On-chip USB 1.1 Host supporting full speed (12Mbps, on-chip transceiver) * Asynchronous direct Modem Interface support including 16KB DPRAM * 3-channel SD/SDIO/HS-MMC interface support including CE-ATA * CF version 3.0 interface support for HDD * 24-channel DMA controller * Support 8×8 key matrix * 10-ch 12-bit multiplexed ADC * 2-ch CAN interface * Configurable GPIOs * Real time clock, PLL, timer with PWM and watch dog timer * Memory Subsystem * SRAM/ROM/NOR/NAND Interface with x8 or x16 data bus * MuxedOneNANDInterface with x16 data bus * 1-port Mobile DDR Interface with x32 data bus (up to 333Mbps/pin DDR) * 1-port DDR2 interface with x16 or x32 data bus (333Mbps/pin DDR) * 1-port LPDDR2 interface (up to 333Mbps/pin DDR)

[http://dev.odroid.com/wiki/odroid/pds/HardwareInformation/S5PC100_UM_REV101.pdf]

MEMORY

DDR2 512MB

Hynix DDR2 memory chips provides 512MB RAM which opens up a wide range of production and development opportunities. DDR2 memory consumes more power than MobileDDR. But, it is pretty much cost effective for huge memory space.

You can choose memory vendor for example Samsung/Hynix/Elpida/Micron or others due to PC industry standard. DDR2 8Bit-bus-width memory is being used for PC/Notebook memory module.

Each chip has 8-bit data-bus-width with 128MB. We mounted 4 chips to make 32bit data bus and total memory size is 512MB.

Each chip has 8-bit data-bus-width with 128MB. We mounted 4 chips to make 32bit data bus and total memory size is 512MB.

Full part number is H5PS1G83EFR-S6. [attachment:Hynix_DDR2.pdf]

Very useful application note for engineers. [attachment:DDR2_device_operation&timing_diagram(Rev.0.1).pdf]

2GB T-Flash(Micro-SD) Card

Traditional memory(Like NOR-FLASH / NAND-FLASH) can't be found in Odroid. Odroid has totally different booting method. Odroid implements direct T-Flash booting with excellent iROM feature of S5PC100.

Odroid has 2Gbyte T-flash(removable) memory card for system area. Assume it has 3,862,528 blocks(sectors) and each block has 512bytes.

<rowbgcolor=“#FFFFE8”> 'Area Name''Size in bytes''From(sector #)''To(Sector #)''Partition Name'
eFuse1K38625263862527
U-boot BL18K38625103862525
U-boot Envi. variables16K38624783862509
U-boot BL2512K38614543862477
Linux Kernel4M38532623861453
Reserved
EXT3 for Recovery System256MB26322723156560mmcblkp3
EXT3 for Android system256MB21027922632271mmcblkp2
EXT3 for Android user data1GB622102791mmcblkp1
Partition table / BPB31K061

Reserved area will be used for FW update and Recovery purpose.

8GB SDHC Card

At this moment, Google Android supports only FAT32 file system. Other file system can be considered for big size 720p-HD contents. 2GB/4GB/8GB seems to be working well. But, 16GB memory card has some compatibility issues.

Where is T-flash(Micro-SD)

Odroid has 2 memory cards.

Open the battery cover and you can find them.

[attachment:SD_tflash.jpg]

Display

LCD

* LMS350DF01-001 is a TMR(Transmissive with Micro Reflective) type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching devices. * This model is composed of a TFT- LCD module, a driver circuit and a back-light unit. * The resolution of a 3.5“ contains 320 x 480 dots and can display up to 16,777,216 colors. [attachment:LMS350DF01_PI_080909.pdf]

Back-light driver

DW8400 from DongWoon Anatech (http://www.dwanatech.com)

The DW8400 is a step-up DC/DC converter designed for driving up to 10 white LEDs in series from a single cell Lithium-Ion battery.

[attachment:DW8400.pdf]

Capacitive Touch screen controller

TouchCore 3.0 from CoreRiver.

[http://www.coreriver.com/product-lines/top_CORERIVERmcu.html]

Wifi & Bluetooth

This elegant combination from Fujitsu Component, based on Marvell's industry leading 88W8686 and CSR's BC4, brings both 802.11(b/g) and Bluetooth to the Odroid.

[attachment:MBH7BWZ04_specification_rev10_20091015.pdf] * Do not distribute/spread this file.

If you want to use this module for your own product, contact Fujitsu first. * http://www.fcl.fujitsu.com/en/contact/ * http://www.fcl.fujitsu.com/en/contact/ * Wireless Modules, Others * Global Marketing 4 Division

Audio Codec

The WM8991 is a highly integrated low power hi-fi CODEC from Wolfson. A powerful 1W speaker driver can operate in class D or AB modes. Stereo 24-bit sigma-delta ADCs and DACs provide hi-fi quality audio record and playback, with a flexible digital audio interface.

[http://dev.odroid.com/wiki/odroid/pds/HardwareInformation/WM8991_Rev4.0.pdf]

Power Supply

PMIC

PMIC MAX8698C supplies important power rails of S5PC100 and other devices. It contains 3 Step-down DC/DCs and 9 LODs.

[attachment:Max8698C_datasheet_Rev8.pdf]

Recently we've got the permission of posting this datasheet from Maxim. But, the permission is limited to this home page. Do not distribute/spread this file to anywhere.

Special thanks: Maxim people.

DC/DC for Wireless device

Wifi-BT combo module consumes a lot of power and PMIC is not enough. So, Odroid takes additional high efficient DC/DC converter MAX1556 of Maxim.

[attachment:MAX1556.pdf]

DC/DC for HDMI-5Volt

HDMI needs 5Volt power rail. FAN5602 is a charge pump based step up/down DC/DC from Fairchild.

[attachment:FA_FAN5602.pdf]

Li+ Battery Fuel Gauge

Odroid reads reliable battery level information from dedicated Li+ battery gauge Max17040 from Maxim.

[attachment:MAX17040.pdf]

Li+ Battery Charger

The XC6802 is a constant-current/constant-voltage linear charger IC for single cell lithium-ion batteries. Current source is USB-bus power.

[attachment:XC6802.pdf]

Accelerometer

The digital 3-axial acceleration sensor of Bosch Sensortec is included in Odroid.

[attachment:BMA150.pdf]

Touch switch (Sound volume up/down)

Odroid volume switches are implemented with touch sensitive IC TS01 from AD-semiconductor.

Datasheet can be found on this link. [http://touch-on.co.kr/board/bbs/board.php?bo_table=touchsensor&wr_id=18]

JTAG

CAUTION: To connect JTAG emulator, you need to open the case and solder many wires. This process can break touch screen flat cable. The touch screen flat cable is really weak.

Note that "This work should be done with your own risk. Any warranty will be completely gone away.

jtag.jpg

This picture shows JTAC connection. There are 20 pins of JTAG. Front side has 10pins and rear side has 10pins. You can find CON1 in the ODROID schematics page-6.

Others

If you request additional information, we will update this wiki