Table of Contents

Android

This page will introduce you how you can download and build Android source tree to customize it for your usage.

If you have not built Android on your desktop yet, please read Android's official build environment set up guide https://source.android.com/source/initializing.html carefully before your proceed. Otherwise, you would have unexpected errors and exhaust to read quite long and complicated build log to find the problem. Also note that you need around 100GB of free space in your storage to get the full source code and binary space. At least 8GB of RAM is required.
Android 5.x (Lollipop) build needs the OpenJDK 7 not the Oracle-Java-JDK.
https://source.android.com/source/requirements.html

Toolchain

For Linux kernel and U-boot, you must install specific toolchains. Android will use its prebuilt ARM toolchain.

U-boot

http://odroid.com/dokuwiki/doku.php?id=en:c1_building_u-boot#toolchain

Linux kernel

http://odroid.com/dokuwiki/doku.php?id=en:c1_building_kernel#toolchain_492

Checkout full source code

This command will initiate to download Android source tree for ODROID-C1.

Android kitkat

4.4.2 v3.2

$ mkdir odroid-c1
$ cd odroid-c1
$ repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master
$ repo sync

4.4.4 v3.3

$ mkdir odroid-c1
$ cd odroid-c1
$ repo init -u https://github.com/hardkernel/android.git -b s805_4.4.4_master
$ repo sync

Android lollipop

$ mkdir odroid-c1
$ cd odroid-c1
$ repo init -u https://github.com/hardkernel/android.git -b s805_5.1.1_master
$ repo sync

Build

Please make sure that you've already installed cross toolchain for kernel and U-boot before you start to build.

There is no specific build script for ODROID-C1, instead it supports generic build step what AOSP does as below.

Android Kitkat

$ export ARCH=arm
$ export CROSS_COMPILE=arm-linux-gnueabihf-
$ export PATH=/opt/toolchains/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/:$PATH
$ export PATH=/opt/toolchains/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin:$PATH
$ export JAVA_HOME=/usr/lib/jvm/java-6-oracle
$ export PATH=$JAVA_HOME/bin:$PATH
$ source build/envsetup.sh
$ lunch odroidc-eng
$ make -j4

Android Lollipop

$ export ARCH=arm
$ export CROSS_COMPILE=arm-linux-gnueabihf-
$ export PATH=/opt/toolchains/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/:$PATH
$ export PATH=/opt/toolchains/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin:$PATH
$ export JAVA_HOME=/usr/lib/jvm/java-1.7.0-openjdk-amd64
$ export PATH=$JAVA_HOME/bin:$PATH
$ source build/envsetup.sh
$ lunch odroidc-eng
$ make -j4

You can replace the number on the command make for simultaneous compile as much as number of core on your build machine. But it should not to exceed 16, otherwise build would stop with an error.

Download

Once Android build is completed, you will have all necessary files to download into your MicroSD/eMMC. If you already have a boot media and can switch to fastboot mode in U-boot, you can proceed to update while executing below commands one by one or ignore particular steps.

Boot loader

$ fastboot flash bootloader out/target/product/odroidc/u-boot.bin

Linux kernel

$ fastboot flash dtb out/target/product/odroidc/meson8b_odroidc.dtb
$ fastboot flash boot out/target/product/odroidc/kernel

Android

These three files contains Linux utilities, Android frameworks and pre-installed Android applicatioins as well as necessary files to run Android. These three files will be flash into its own partition dedicated, please find the partition table pre-defined for each partition's size.

KitKat

$ fastboot flash system out/target/product/odroidc/rootsystem.img
$ fastboot flash userdata out/target/product/odroidc/userdata.img
$ fastboot flash cache out/target/product/odroidc/cache.img

Lollipop

$ fastboot flash system out/target/product/odroidc/rootsystem.img
$ fastboot flash cache out/target/product/odroidc/cache.img

Misc

These file are not mandatory for Android to use, but useful for further features. recovery.img helps you to update Android system, ODROID-C1 use this for installatioin. hardkernel-720.bmp is to show a logo on your HDMI display on boot and disappear when Android display subsystem is initiated.

Kikkat

$ fastboot flash recovery out/target/product/odroidc/recovery.img
$ fastboot flash logo out/target/product/odroidc/hardkernel-720.bmp

Lollipop

$ fastboot flash recovery out/target/product/odroidc/recovery.img
$ fastboot flash logo out/target/product/odroidc/hardkernel-720.bmp.gz

How to create Android bootable media with empty MicroSD/eMMC

Proceed each steps

Using Self-Installation Image

This is the same way how Hardkernel team create Android release image and most easiest way to have bootable media on your ODROID-C1 if you proceed one more build step. This procedure combine all required image files created by Android build into single file, out/target/product/odroidc/selfinstall-odroidc.bin.

$ make selfinstall

Using Updatepackage.zip

out/target/product/odroidc/updatepackage-odroidc-signed.zip.

$ make updatepackage

Copy updatepackage-odroidc-signed.zip via USB mass storage and run ODROID Utility and Select “Package install from storage”.

FAQ

How can I get into fastboot mode to download Android images

You need USB-serial kit. You must press any key on your keyboard when ODROID-C1 is started. This will stop booting and give you U-boot command line, just execute the command fastboot.

I do not have a boot media yet, how can I download Android images to my MicroSD or eMMC?

Obviously you must have a boot media can boot from ODROID-C1 directly in order to enter fastboot mode in U-boot. Otherwise you are not able to download Android image to dedicated partitions (system/userdata/cache). The image files for such partitioins can not be downloaded from a desktop directly with dd, for example, since these images are compressed and fastboot extract while installing for each partitions.

I do not have USB-serial kit, so I am not able to get into U-boot

The current U-boot does not support any other input device except serial console, hence you need USB-serial kit. Possible work around is to install a released Android image by Hardkernel team, and execute a command reboot fastboot from Android's shell command line. It will restart ODROID-C1 and stop on U-boot to get into fastboot mode. You can execute command fastboot from your desktop while USB cable is connected with ODROID-C1.

Why don't we download boot.img created by Android build

ODROID-C1's Android file system is little bit different with others for easy customizing. We made another Android system image file, rootsystem.img, which is combined with Linux root file system. We don't use boot.img as well as system.img but download Linux kernel image and rootsystem.img instead.