Table of Contents

Release Note of Android (5.1.1-v1.2)


Summary

Release Date Sep/17/2016 KST
Release Type Regular release
Release Files Self-installation Image (MD5SUM: 83f2a78b119eba4834477d327498c381)

File name : selfinstall-odroidc-eng-s805_5.1.1_master-22-v1.2.img

New updates

Known issue

Update Instruction

There is no way to update to 5.1 from 4.4. Need to freshly install 5.1.1 image on SD or eMMC.

Self Installation

You can install the release to your MicroSD or eMMC with the tool dd in Linux or Win32DiskImager in Windows. Please refer this for more detail.

We have been reported that some of users can not watch Android logo on their TV while installing even though installation is proceeded. So please wait for 5 minutes since power on and red and blue LED is on. If blue led is started blinking then installation is proceeding, ODROID-C1 will reboot when finished.

Upgrade Installation

Since Android release 2.0, we provide you update package which can upgrade your device without rewrite your SD card or eMMC. This package can be downloaded and upgrade on ODROID Utility.

Fastboot Update

Your can update the release by fastboot if you have MicroSD or eMMC already Android installed. If you have USB-Serial kit, you can enter to Fastboot mode when you execute the command fastboot on U-boot command line. Or if you run execute reboot fastboot from Android shell command line, your ODROID-C1 will reboot and get into fastboot mode immediately. You can check if your ODROID-C1 is attached via USB with the command fastboot devices in your desktop.

$ sudo fastboot flash bootloader u-boot.bin
$ sudo fastboot flash dtb meson8b_odroidc.dtb
$ sudo fastboot flash boot kernel
$ sudo fastboot flash recovery recovery.img
$ sudo fastboot flash logo hardkernel-720.bmp.gz
$ sudo fastboot flash system rootsystem.img
$ sudo fastboot flash userdata userdata.img
$ sudo fastboot flash cache cache.img
$ sudo fastboot reboot

How to checkout

You can checkout Android source tree, please refer this page for more detail. Please note, Android source tree is uploading and would be completed in 1-2 days.

Android

$ mkdir odroid-c1
$ cd odroid-c1
$ repo init -u https://github.com/hardkernel/android.git -b s805_5.1.1_master
$ repo sync
$ repo start s805_5.1.1_master --all

ODROID Utility

packages/apps/Utility

Reference boot.ini

boot.ini
ODROIDC-UBOOT-CONFIG
 
# Resolution Configuration
# 'hdmimode' must be one of below to configure display resolution within
# supported by your TV or monitor.
#    Symbol           | Resolution
# --------------------+-------------
#    "vga"            | 640x480
#    "480p"           | 720x480
#    "576p"           | 720x576
#    "800x480p60hz"   | 800x480
#    "800x600p60hz"   | 800x600
#    "1024x600p60hz"  | 1024x600
#    "1024x768p60hz"  | 1024x768
#    "1080i50hz"      | 1080I@50Hz
#    "1080p24hz"      | 1080P@24Hz
#    "1080p50hz"      | 1080P@50Hz
#    "1080p"          | 1080P@60Hz
#    "720p"           | 1280x720
#    "800p"           | 1280x800
#    "sxga"           | 1280x1024
#    "1360x768p60hz"  | 1360x768
#    "1366x768p60hz"  | 1366x768
#    "1440x900p60hz"  | 1440x900
#    "1600x900p60hz"  | 1600x900
#    "1680x1050p60hz" | 1680x1050
#    "1920x1200"      | 1920x1200
setenv hdmimode "1080p"
 
# HDMI/DVI Mode Configuration
# This will enforce the singal type of display
# "hdmi" - For HDMI interface
# "dvi"  - For DVI interface
setenv vout_mode "hdmi"
 
# HPD enable/disable option
setenv disablehpd "false"
 
# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"
suspend_hdmiphy=0
 
# UHS Card Configuration
# Uncomment the line below to __DISABLE__ UHS-1 MicroSD support
# This might break boot for some brand/models of cards.
#setenv disableuhs "disableuhs"
 
# Disable IR remote
setenv ir_remote "1"
 
setenv selinuxopt "androidboot.selinux=disabled"
 
# Booting
setenv bootargs "root=/dev/mmcblk0p2 rw console=ttyS0,115200n8 no_console_suspend vdaccfg=${vdac_config} logo=osd1,loaded,${fb_addr},${outputmode},full hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig} vout=${vout_mode} disablehpd=${disablehpd} ${disableuhs} androidboot.serialno=${fbt_id#} ir_remote=${ir_remote} usbcore.autosuspend=-1 ${selinuxopt} suspend_hdmiphy=${suspend_hdmiphy}"
 
save
 
setenv bootcmd "movi read boot 0 0x12000000; movi read dtb 0 0x12800000; bootm 0x12000000 - 0x12800000"
run bootcmd