en:show_usage_show

Setting environmental
Bash example
Linux C example
- Show your x86 Stats

Setting environmental

Download ODROID-SHOW source code first.
Then connect microUSB cable to the Host PC with ODROID-SHOW.
Finally check the serial port number and run bash shell script file.

Jumper must be not connected to ODROID-SHOW when you run sclript or echo

Download ODROID-SHOW source code

> sudo apt-get install git
> git clone https://github.com/hardkernel/ODROID-SHOW

Check the serial port number after connecting the micro-USB cable

> ls /dev/ttyUSB*

Modify the serial port number

In the ODROID-SHOW/example/linux

#include <stdio.h>
#include <fcntl.h>
#include <termios.h>
#include <errno.h>
 
#define baudrate	B500000
 
const char serialPort[] = "/dev/ttyUSB0";
 
int main(void)
{
	int usbdev;
	struct termios options;
 
	usbdev = open(serialPort, O_RDWR | O_NOCTTY | O_NDELAY);
 
	if (usbdev == -1)
		perror("open_port : Unable to open:");
 
	tcgetattr(usbdev, &options);
 
	cfsetispeed(&options, baudrate);
	cfsetospeed(&options, baudrate);
 
	options.c_cflag |= CS8;
	options.c_iflag |= IGNBRK;
	options.c_iflag &= ~( BRKINT | ICRNL | IMAXBEL | IXON);
	options.c_oflag &= ~( OPOST | ONLCR );
	options.c_lflag &= ~( ISIG | ICANON | IEXTEN | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE);
	options.c_lflag |= NOFLSH;
	options.c_cflag &= ~CRTSCTS;
 
	tcsetattr(usbdev, TCSANOW, &options);
 
	while(1)
		sleep(0.2);
 
	return 0;
}

Compile the port_open.c

> gcc -o port_open port_open.c

Bash example

This bash script can display 2 text strings with different color and different font size.
Open the “/dev/ttyUSB0” port and sending VT100/ANSI commands with a couple of strings.
It also changes the color of strings.

Text output

In the ODROID-SHOW/example/linux/ODROID.sh

#!/bin/bash
 
flag=0
serialPort="/dev/ttyUSB0"
 
trap "flag=1" SIGINT SIGKILL SIGTERM
 
./port_open &
subppid=$!
 
DATA[0]="ODROID"
DATA[1]="SHOW"
 
echo -ne "\e[5s\e[0r" > $serialPort
sleep 0.1
echo -ne "\ec" > $serialPort
sleep 0.1
 
while true
do
	if [ $flag -ne 0 ] ; then
		echo -ne "\ec\e[2s\e[1r" > $serialPort
		kill $subppid
		exit
	fi
	for ((j=1; j<8; j++)); do
		echo -ne "\e[25;100f" > $serialPort
		for ((i=0; i<6; i++)); do
			echo -ne "\e[3"$j"m\e[3"$j"m${DATA[0]:$i:1}" > $serialPort
			sleep 0.02
		done
		echo -ne "\eE\e[55;150f" > $serialPort
		for ((i=0; i<4; i++)); do
			echo -ne "\e[3"$j"m\e[3"$j"m${DATA[1]:$i:1}" > $serialPort
			sleep 0.02
		done
	done
done

Show your ODROID's Stats

This bash script show the ODROID’s stats and clock.
To run this script, you need to install the sysstat first.

> sudo apt-get install sysstat

This script will show the clock, 4-core load status, CPU frequency and CPU temperature.

In the ODROID-SHOW/example/linux/status.sh

#!/bin/bash
 
flag=0
serialPort="/dev/ttyUSB0"
 
trap "flag=1" SIGINT SIGKILL SIGTERM
 
./port_open &
subppid=$!
 
echo -ne "\ec\e[2s\e[3r" > $serialPort
sleep 0.1
 
function cpu_state {
	cpuFreqM=$(echo "scale=0; " `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq` "/1000" | bc)
	cpuTempM=$(echo "scale=1; " `cat /sys/class/thermal/thermal_zone0/temp` "/1000" | bc)
}
 
while true
do
	if [ $flag -ne 0 ] ; then
		echo -ne "\ec\e[2s\e[1r" > $serialPort
		sleep 0.1
		kill $subppid
		exit
	fi
		echo -ne "\e[H\e[35mTime : \e[36m" > $serialPort
		date +"%T" > $serialPort
		sleep 0.1
		echo -ne "\eE\eM\e[32mcore0 : \e[31m" > $serialPort
		sleep 0.1
		mpstat -P 0 | grep -A1 "usr" | grep -v "usr" | awk '{print ""$4"%   "}' > $serialPort
		sleep 0.1
		echo -ne "\eE\eM\e[32mcore1 : \e[31m" > $serialPort
		sleep 0.1
		mpstat -P 1 | grep -A1 "usr" | grep -v "usr" | awk '{print ""$4"%   "}' > $serialPort
		sleep 0.1
		echo -ne "\eE\eM\e[32mcore2 : \e[31m" > $serialPort
		sleep 0.1
		mpstat -P 2 | grep -A1 "usr" | grep -v "usr" | awk '{print ""$4"%   "}' > $serialPort
		sleep 0.1
		echo -ne "\eE\eM\e[32mcore3 : \e[31m" > $serialPort
		sleep 0.1
		mpstat -P 3 | grep -A1 "usr" | grep -v "usr" | awk '{print ""$4"%   "}' > $serialPort
		sleep 0.1
		cpu_state
		echo -ne "\eE\eM" > $serialPort
		sleep 0.1
		echo -ne "\e[33mCPU Freq: \e[37m"$cpuFreqM"MHz   \eE" > $serialPort
		echo -ne "\e[33mCPU Temp: \e[37m$cpuTempM\e   " > $serialPort
		sleep 0.1
done

Image display

You can display a graphic image on the ODROID-SHOW.
It supports only raw RGB-565 format.

We used ffmpeg to convert a normal PNG file to raw RGB file. Note that you must resize the PNG file first.

> sudo apt-get install ffmpeg

You can convert it with this command. If the conversion is success, you will have the penguin.raw file.

> ffmpeg -vcodec png -i penguin.png -vcodec rawvideo -f rawvideo -pix_fmt rgb565 penguin.raw

You can set the image load mode with the pixel coordination parameters.

In the ODROID-SHOW/example/linux/images.h

#!/bin/bash
 
flag=0
serial="/dev/ttyUSB0"
 
trap "flag=1" SIGINT SIGKILL SIGTERM
 
./port_open &
subppid=$!
 
echo -ne "\ec\e[0r" > $serial
sleep 0.3
 
while true
do
	if [ $flag -ne 0 ] ; then
		echo -ne "\ec\e[1r" > $serial
		kill $subppid
		exit
	fi
		echo -ne "\e[0r" > $serial
		sleep 0.2
		echo -ne "\e[0;0,240;320i" > $serial
		cat penguin.raw > $serial
		sleep 0.1
		echo -ne "\e[1r" > $serial
		sleep 0.2
		echo -ne "\e[0;0,320;240i" > $serial
		cat butterfly.raw > $serial
		sleep 0.1
		echo -ne "\e[0r" > $serial
		sleep 0.2
		echo -ne "\e[0;0,240;320i" > $serial
		cat woof.raw > $serial
		sleep 0.1
		echo -ne "\ec\e[0r" > $serial
		sleep 0.3
		echo -ne "\e[40;10,220;200i" > $serial
		cat paint.raw > $serial
		sleep 0.1
		echo -ne "\ec\e[1r" > $serial
		sleep 0.3
		echo -ne "\e[10;10,190;200i" > $serial
		cat paint.raw > $serial
		sleep 0.1
done

Linux C example

In the ODROID-SHOW/example/linux/status.c

> gcc -o status status.c

Show your x86 Stats

#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <time.h>
#include <sys/utsname.h>
#include <sys/statvfs.h>
 
#include <math.h>
 
#include <fcntl.h>
#include <termios.h>
#include <errno.h>
 
#define baudrate	B500000
 
#define String_startsWith(s, match) (strstr((s), (match)) == (s))
 
const char procstat[] = "/proc/stat";
const char serialPort[] = "/dev/ttyUSB0";
const char mountPath[] = "/";
 
typedef struct CPUData_ {
	unsigned long long int totalTime;
	unsigned long long int userTime;
 
	unsigned long long int totalPeriod;
	unsigned long long int userPeriod;
} CPUData;
 
struct diskData_ {
	unsigned long disk_size;
	unsigned long used;
	unsigned long free;
};
 
int serialSetup(void)
{
	int usbdev;
	struct termios options;
 
	usbdev = open(serialPort, O_RDWR | O_NOCTTY | O_NDELAY);
 
	if (usbdev == -1)
		perror("open_port : Unable to open:");
 
	tcgetattr(usbdev, &options);
 
	cfsetispeed(&options, baudrate);
	cfsetospeed(&options, baudrate);
 
	options.c_cflag |= CS8;
	options.c_iflag |= IGNBRK;
	options.c_iflag &= ~( BRKINT | ICRNL | IMAXBEL | IXON);
	options.c_oflag &= ~( OPOST | ONLCR );
	options.c_lflag &= ~( ISIG | ICANON | IEXTEN | ECHO | ECHOE | ECHOK |
							ECHOCTL | ECHOKE);
	options.c_lflag |= NOFLSH;
	options.c_cflag &= ~CRTSCTS;
 
	tcsetattr(usbdev, TCSANOW, &options);
 
	return usbdev;
}
 
struct diskData_ diskSpace(const char *Path)
{
	struct statvfs vfs;
	struct diskData_ diskData;
	if (!statvfs(Path, &vfs)) {
		diskData.disk_size = vfs.f_blocks * vfs.f_bsize;
		diskData.free = vfs.f_bfree * vfs.f_bsize;
		diskData.used = diskData.disk_size - diskData.free;
	}
	return diskData;
}
 
int cpuCount(char *buf, int cpus)
{
	FILE *file = fopen(procstat, "r");
	assert(file != NULL);
 
	do {
		cpus++;
		fgets(buf, 255, file);
	} while (String_startsWith(buf, "cpu"));
 
	fclose(file);
 
	return cpus;
}
 
void systemInfo(int fd, char *buf)
{
	time_t t;
	struct utsname uts;
	time(&t);
	sprintf(buf, "\e[35m%s\r", ctime(&t));
	write(fd, buf, strlen(buf) + 1);
	usleep(300000);
	uname(&uts);
	sprintf(buf, "\e[37mOSname:\e[36m%s\n\r", uts.sysname);
	write(fd, buf, strlen(buf) + 1);
	sprintf(buf, "\e[37mVersion:\e[36m%s\n\r", uts.release);
	write(fd, buf, strlen(buf) + 1);
	sprintf(buf, "\e[37mMachine:\e[36m%s\n\r", uts.machine);
	write(fd, buf, strlen(buf) + 1);
}
 
int main(void)
{
	unsigned long long int usertime, nicetime, systemtime, systemalltime,
				idlealltime, idletime, totaltime, virtalltime;
	double total = 0;
	char buffer[256];
	int cpus = -1;
	int i;
	time_t t;
	struct utsname uts;
	int usbdev;
	usbdev = serialSetup();
	FILE *file;
	const unsigned int GB = 1024*1024*1024;
	struct diskData_ diskData;
	diskData = diskSpace(mountPath);
	diskData.disk_size /= GB;
	diskData.used /= GB;
	diskData.free /= GB;
//	printf("Disk usage : %lu \t Free space %lu,%lu\n", diskData.disk_size/GB, diskData.free/GB, diskData.used/GB);
//	return 0;
 
	cpus = cpuCount(buffer, cpus);
	CPUData cpuData[cpus];
 
	for (i = 0; i < cpus; i++) {
		cpuData[i].totalTime = 1;
		cpuData[i].userTime = 0;
		cpuData[i].totalPeriod = 1;
		cpuData[i].userPeriod = 0;
	}
 
	sprintf(buffer, "\ec\e[2s\e[1r");
	write(usbdev, buffer, strlen(buffer) + 1);
	fsync(usbdev);
 
	int cpuid;
	unsigned long long int ioWait, irq, softIrq, steal, guest;
	ioWait = irq = softIrq = steal = guest = 0;
 
	while (1) {
		sprintf(buffer, "\e[H");
		write(usbdev, buffer, strlen(buffer) + 1);
		fsync(usbdev);
		usleep(300000);
		systemInfo(usbdev, buffer);
		fsync(usbdev);
		usleep(300000);
		file = fopen(procstat, "r");
		for (i = 0; i < cpus; i++) {
			fgets(buffer, 255, file);
			if (i == 0) {
				sscanf(buffer, "cpu %llu %llu %llu %llu %llu %llu %llu %llu %llu",
					&usertime, &nicetime, &systemtime, &idletime,
					&ioWait, &irq, &softIrq, &steal, &guest);
			} else {
				sscanf(buffer, "cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu",
					&cpuid, &usertime, &nicetime, &systemtime, &idletime,
					&ioWait, &irq, &softIrq, &steal, &guest);
				assert(cpuid == i - 1);
			}
 
			idlealltime = idletime + ioWait;
			systemalltime = systemtime + irq + softIrq;
			virtalltime = steal + guest;
			totaltime = usertime + nicetime + systemalltime +
						idlealltime + virtalltime;
 
			assert(usertime >= cpuData[i].userTime);
			assert(totaltime >= cpuData[i].totalTime);
 
			cpuData[i].userPeriod = usertime - cpuData[i].userTime;
			cpuData[i].totalPeriod = totaltime - cpuData[i].totalTime;
 
			cpuData[i].totalTime = totaltime;
			cpuData[i].userTime = usertime;
 
			total = (double)cpuData[i].totalPeriod;
			if ((i != 0) && (i%2 == 1)) {	
				sprintf(buffer, "\e[33mcpu%d :\e[32m%4.1f%% ",
					i, cpuData[i].userPeriod/total*100.0);
				write(usbdev, buffer, strlen(buffer) + 1);
				fsync(usbdev);
			} else if ((i != 0) && (i%2 == 0)) {
				sprintf(buffer, "\e[33mcpu%d :\e[32m%4.1f%%  \n\r",
					i, cpuData[i].userPeriod/total*100.0);
				write(usbdev, buffer, strlen(buffer) + 1);
				fsync(usbdev);
			}
		}
		sprintf(buffer, "\e[37msda1\n\r\e[33mdisk_size : \e[32m%ldGB\n\r",
							diskData.disk_size);
		write(usbdev, buffer, strlen(buffer) + 1);
		usleep(100000);
		sprintf(buffer, "\e[35mused : \e[32m%ldGB\n\r",
							diskData.used);
		write(usbdev, buffer, strlen(buffer) + 1);
		usleep(100000);
		sprintf(buffer, "\e[36mfree : \e[32m%ldGB",
							diskData.free);
		write(usbdev, buffer, strlen(buffer) + 1);
		usleep(100000);
		fclose(file);
	}
 
	return 0;
}

Table of Contents