2.2" TFT LCD on the Odroid W

• Odroid W
• uSD-Card ⇒ over 2GB or eMMC Module
• W Docking Board with TFT LCD

1. Building the kernel
   Please refer to Kernel compilation for odroid-w
2. Enable SPI by running:

   sudo vi /etc/modprobe.d/raspi-blacklist.conf

   Find the SPI line where the spi is black listed

   blacklist spi-bcm2708

   Comment it out by replacing it with the line below

   #blacklist spi-bcm2708

3. Enable driver
   Add to file /etc/modules

   fbtft_device name=adafruit22a verbose=0 rotate=90

4. Auto login and startx
   Auto login: modify file /etc/inittab

   #1:2345:respawn:/sbin/getty --noclear 38400 tty1
   1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1

   Auto startx: modify file /etc/rc.local

   su -l pi -c "env FRAMEBUFFER=/dev/fb1 startx &"

   Disable the option in /usr/share/X11/xorg.conf.d/99-fbturbo.conf

   #          Option        "fbdev" "/dev/fb0"

   Console at boot: Add kernel argument to file /boot/cmdline.txt

    fbcon=map:10 

   Save the file and reboot your Odroid W.

   sudo reboot

For more information, please refer to https://github.com/notro/fbtft/wiki