Release Note of Android (v1.6)

• Boot failure due to WiFi dongle is not attached while WiFi setting is on
• HDMI flickering and audio drop issue is patched/fixed
• Particular system nodes' permission is changed to 0666 for Kodi/SPMC

You can install the release to your MicroSD or eMMC with the tool dd in Linux or Win32DiskImager in Windows. Please refer this for more detail.

Your can update the release by fastboot if you have MicroSD or eMMC already Android installed. If you have USB-Serial kit, you can enter to Fastboot mode when you execute the command fastboot on U-boot command line. Or if you run execute reboot fastboot from Android shell command line, your ODROID-C1 will reboot and get into fastboot mode immediately. You can check if your ODROID-C1 is attached via USB with the command fastboot devices in your desktop.

$ sudo fastboot flash bootloader u-boot.bin
$ sudo fastboot flash dtb meson8b_odroidc.dtb
$ sudo fastboot flash boot kernel
$ sudo fastboot flash recovery recovery.img
$ sudo fastboot flash logo hardkernel-720.bmp
$ sudo fastboot flash system rootsystem.img
$ sudo fastboot flash userdata userdata.img
$ sudo fastboot flash cache cache.img
$ sudo fastboot reboot

You can checkout Android source tree, please refer this page for more detail. Please note, Android source tree is uploading and would be completed in 1-2 days.

$ mkdir odroid-c1
$ cd odroid-c1
$ repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master
$ repo sync
$ repo start s805_4.4.2_master --all

$ git clone --depth 1 https://github.com/codewalkerster/android_packages_apps_Utility.git -b s805_4.4.2_dev_master

This is the reference boot.ini to customize the boot configuration instead of default. You can just download it and copy into VFAT partition of your MicroSD/eMMC, it will be affected on next boot immediately. Not like Hardkernel's Ubuntu release, this boot.ini does not require uImage and meson8b_odroidc.dtd. This will read such files from the booting card directly.

boot.ini

ODROIDC-UBOOT-CONFIG
 
# Possible screen resolutions
# Uncomment only a single Line! The line with setenv written.
# At least one mode must be selected.
 
# setenv m "vga"          	# 640x480
# setenv m "480p"         	# 720x480
# setenv m "576p"         	# 720x576
# setenv m "800x480p60hz" 	# 800x480
# setenv m "800x600p60hz" 	# 800x600
# setenv m "1024x600p60hz"	# 1024x600
# setenv m "1024x768p60hz"	# 1024x768
# setenv m "1360x768p60hz" 	# 1360x768
# setenv m "1366x768p60hz"	# 1366x768
# setenv m "1440x900p60hz"	# 1440x900
# setenv m "1600x900p60hz"	# 1600x900
# setenv m "1680x1050p60hz"	# 1680x1050
# setenv m "720p"         	# 720p 1280x720
# setenv m "800p"         	# 1280x800
# setenv m "sxga"         	# 1280x1024
# setenv m "1080i50hz"          # 1080I@50Hz
# setenv m "1080p24hz"          # 1080P@24Hz
# setenv m "1080p50hz"          # 1080P@50Hz
setenv m "1080p"                # 1080P@60Hz
# setenv m "1920x1200"    	# 1920x1200
 
# HDMI/DVI Mode Configuration
setenv vout_mode "hdmi"
# setenv vout_mode "dvi"
 
# UHS Card Configuration
# Uncomment the line below to __DISABLE__ UHS-1 MicroSD support
# This might break boot for some brand/models of cards.
setenv disableuhs "disableuhs"
 
# CEC Configuration
setenv cecconfig "cecf"
 
# Booting
setenv bootargs "root=/dev/mmcblk0p2 rw console=ttyS0,115200n8 no_console_suspend vdaccfg=${vdac_config} logo=osd1,loaded,${fb_addr},${outputmode},full hdmimode=${m} cvbsmode=${cvbsmode} hdmitx=${cecconfig} vout=${vout_mode} ${disableuhs} androidboot.serialno=${fbt_id#}"
setenv bootcmd "movi read boot 0 0x12000000; movi read dtb 0 0x12800000; bootm 0x12000000 - 0x12800000"
run bootcmd