====== Cloudshell LCD Configuration ======

Cloudshell features a 2.2" TFT LCD with a 320x240 resolution. The display is controlled by the well-known ILI9340 controller.

It uses SPI @ 40Mhz to talk with the LCD. (SPI 1)

[[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143599699669|Where to buy]]


** Tested on Ubuntu 16.04 Minimal **



=== Module configuration ===
<code>
sudo -s
echo "options fbtft_device name=hktft9340 busnum=1 rotate=270" > /etc/modprobe.d/odroid-cloudshell.conf
echo "spi_s3c64xx" >> /etc/modules
echo "spidev" >> /etc/modules
echo "fbtft_device" >> /etc/modules
</code>

=== Edit /etc/modprobe.d/blacklist-odroid.conf ===
Remove the blacklist on spi.

<code>
# Comment the required lines

# IO Board
blacklist ioboard_bh1780
blacklist ioboard_bmp180
blacklist ioboard_keyled

# SPI
# blacklist spidev
# blacklist spi_s3c64xx

# 3.2" LCD Touchscreen driver
blacklist ads7846
</code>



The commands above will ensure that at every boot the LCD is configured.

Reboot the board with **HDMI cable disconnected** and you should see already information going to the 2.2" LCD.