====== Configuring the IR Sensor on Cloudshell ======
===== Setup =====
Use the automated tool to configure it. ([[https://github.com/mdrjr/cloudshell_ir|Github Project page]])
<code>wget https://raw.githubusercontent.com/mdrjr/cloudshell_ir/master/install_ir.sh
chmod +x install_ir.sh
sudo ./install_ir.sh
</code>

===== Registering your own remote controller =====
By default **ODROID CloudShell** package installs and configures the remote for Hardkernel's official remote what is selling for ODROID-C1. Open [[http://www.hardkernel.com/main/products/prdt_info.php?g_code=G141637537661|this]] for the detail of default remote controller.

Since **odroid-cloudshell** package is based on **lirc**, popular software package for IR remote controller, you can register your IR remote controller to ODROID CloudShell as well. 

You can check if you remote already have a pre-made configuration here: [[http://lirc.sourceforge.net/remotes/|LIRC Remote's Database]]

Download the file matching your remote and save as **/etc/lirc/lircd.conf**



If your remote doesn't have a pre-made config file, please refer the [[http://odroid.com/dokuwiki/doku.php?id=en:c1_lirc#registering_own_remote_controller|this]] for the instructions.