====== Setting up the Weather-Board ======
First download the ODROID-SHOW source code with github.\\
Then add libraries after install the arduino IDE.\\
Finally after **connecting jumper**, compile and upload.
==== Download the ODROID-SHOW source code ====
=== Ubuntu ===
<code bash>
#sudo apt-get install git
#cd ~/work
#git clone https://github.com/hardkernel/ODROID-SHOW
</code>
=== Windows ===
{{https://github.com/hardkernel/ODROID-SHOW/archive/master.zip|ODROID-SHOW.zip}}
==== Install the arduino IDE ====
=== Ubuntu ===
Launch Ubuntu Software Center, search for "arduino", and install it

{{:en:software_center.png?500|}}

=== Windows ===
{{http://arduino.googlecode.com/files/arduino-1.0.5-r2-windows.zip|ArduinoIDE.zip}}
==== Run arduino IDE ====
Open "weather_board.ino" sketch file in this path.\\
ODROID-SHOW/weather_board/weather_board.ino
==== Setting Preferences ====
You MUST locate sketchbook path to ODROID-SHOW directory.

{{:en:preferences.png?500|}}
==== Add Libraries ====
You need to add the ODROID-SHOW libraries in the IDE through the menu skech -> import Library... -> Add Library...

{{:en:add_library.png?500|}}

The following way, add ODROID-SHOW folder. (sketchbook folder)

{{:en:add_library2.png?500|}}
==== Compile and Upload ====
Check the serial port between /dev/ttyUSBn and "tools -> Serial Port" of arduino IDE.

  ls /dev/ttyUSB*

{{:en:check_serialport.png?500|}}

Finally **after connecting jumper**, click "upload" button of arduino IDE.
==== Output screen ====
{{ :en:weatherboard_setup.jpg?500 |}}