====== WEATHER-BOARD on ODROID-XU4 ======

{{:en:weather_board:wb3_xu4_wire.png?400|}}

**I2CA (/dev/i2c-1)**
^Pin Number^Net Name^Export Number^^
^:::^:::^C0/C1/C1+^C2^
|3|I2CA.SDA|74|205|
|5|I2CA.SCL|75|206|

**I2CB (/dev/i2c-2)**
^Pin Number^Net Name^Export Number^^
^:::^:::^C0/C1/C1+^C2^
|27|I2CB.SDA|76|207|
|28|I2CB.SCL|77|208|
====== Settings I2C ======
Add I2C module
  sudo modprobe aml_i2c
  ls /dev/i2c-*

To always load the kernel module on boot up, run the following command.
  echo "aml_i2c" | sudo tee -a /etc/modules
====== Download & Run ======
  git clone https://github.com/hardkernel/WEATHER-BOARD.git
  cd WEATHER-BOARD/c_weather
  make
Check your I2C node, and run the program.
  sudo ./weather_board
or
  sudo ./weather_board /dev/i2c-2

{{:en:weather_board:print_wb.png?500|}}